Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,194,531Inspections Most recent open 2026-08-11 Last loaded 2026-08-14

OSHA Inspection: ARIES CUSTOM WORKS, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of ARIES CUSTOM WORKS, INC. in 22 KENT STREET, SOMERVILLE, MA 02143 (NAICS 321999). OSHA activity number 339246993.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Aries Custom Works, INC. for free Get an email when a new federal OSHA severe-injury report for Aries Custom Works, INC. is published. One employer, no account, unsubscribe in one click.
Site address
22 KENT STREET
City
SOMERVILLE
State
MA
ZIP
02143
Mailing
16 HAWTHORNE STREET, SOMERVILLE, MA 02144
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321999
Employees
9
Ownership type
Private (A)

5 citations on file for this inspection.

1910.22 A01

Serious Gravity 5 1 instance 4 exposed
Issued
Sep 24, 2013
Abate by
Oct 27, 2013
Penalty
Initial $2,000 · Current $1,060 Reduced
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition.    (a) Location - 22 Kent Street, Somerville, MA (Wood Shop):    On or about 8/1/2013, surfaces within the wood shop including: floors, tables, and the tops of pieces of equipment and materials in storage had excessive accumulations of combustible wood dust.
Recent events (2)
  • · I (S) $1060
  • · Z (S) $2000

1910.134 E01

Serious Gravity 5 1 instance 3 exposed
Issued
Sep 24, 2013
Abate by
Oct 27, 2013
Penalty
Initial $2,000 · Current $1,060 Reduced
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee�s ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:    (a) Location - 22 Kent Street, Somerville, MA:    On or about 8/1/2013, employees using filtering half face piece respirators as mandated by the employer were not evaluated by a competent medical authority for their ability to wear respirators.
Recent events (2)
  • · I (S) $1060
  • · Z (S) $2000

1910.212 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 24, 2013
Penalty
Initial $1,700 · Current $900 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    (a) Location - 22 Kent Street, Somerville, MA (Metal Shop):    On or about 8/1/2013, the blade of a Jet manual cold saw was unguarded.
Recent events (2)
  • · I (S) $900
  • · Z (S) $1700

1910.213 C01

Serious Gravity 5 2 instances 1 exposed
Issued
Sep 24, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:   (a) Location - 22 Kent Street, Somerville, MA (Wood Shop):  On or about 8/1/2013, the blade of a Rigid table saw was unguarded.  (b) Location - 22 Kent Street, Somerville, MA (Wood Shop):  On or about 8/1/2013, the blade of a Delta table saw was unguarded.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.303 B08 I

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 24, 2013
Abate by
Oct 27, 2013
Penalty
Initial $1,600 · Current $850 Reduced
29 CFR 1910.303(b)(8)(i): Electric equipment shall be firmly secured to the surface on which it is mounted:    (a) Location - 22 Kent Street, Somerville, MA (Wood Shop):    On or about 8/1/2013, the outlet box of an outlet powering a Rigid table saw was on the floor unmounted.
Recent events (2)
  • · I (S) $850
  • · Z (S) $1600

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339246993.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.