Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: KERNS MANUFACTURING CORP.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of KERNS MANUFACTURING CORP. in 37-14 29TH STREET, LONG ISLAND CITY, NY 11101 (NAICS 336413). OSHA activity number 339247694.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Kerns Manufacturing Corp. — free Get an email when a new federal OSHA severe-injury report for Kerns Manufacturing Corp. is published. One employer, no account, unsubscribe in one click.
Site address
37-14 29TH STREET
City
LONG ISLAND CITY
State
NY
ZIP
11101
Mailing
37-14 29TH STREET, LONG ISLAND CITY, NY 11101
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
336413
Employees
100
Ownership type
A

6 citations on file for this inspection.

1910.133 A01

Serious Gravity 5 1 instance 4 exposed
Issued
Dec 19, 2013
Abate by
Jan 16, 2014
Penalty
Initial $3,500 · Current $1,750 Reduced
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation:    a)    On or about July 26, 2013-Job site at 37-14 29th Street, Long Island City NY 11101    Employer did not provide eye protection from flying debris during machining operations.      WRITTEN ABATEMENT CERTIFICATION IS  REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (2)
  • — I (S) $1750
  • — Z (S) $3500

1910.215 A04

Serious Gravity 5 1 instance 1 exposed
Issued
Dec 19, 2013
Penalty
Initial $3,500 · Current $1,750 Reduced
29 CFR 1910.215(a)(4): On offhand grinding machines, work rests were not used to support the work and/or were not kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage:    a) On or about July 26, 2013-Job site at 37-14 29th Street, Long Island City NY 11101    Employer permitted an employee to use grinder with a tool rest set 1 inch from the grinding surface.      WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (2)
  • — I (S) $1750
  • — Z (S) $3500

1910.215 B09

Serious Gravity 5 1 instance 1 exposed
Issued
Dec 19, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.215(b)(9): 29 CFR 1910.215(b)(9):  The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:  a)  On or about July 26, 2013,Job site at 37-14 29th Street Long Island City 11101 NY,               Employer permitted an employee to use a grinding wheel with tongue guard set greater than ¼ inch from    grinding surface.  WRITTEN ABATEMENT CERTIFICATION IS NOT REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 C01

Other-than-serious 1 instance 3 exposed
Issued
Dec 19, 2013
Abate by
Feb 7, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.134(c)(1): the employer to develop and implement a written respiratory protection program with required worksite-specific procedures and elements for required respirator use:  a)    On or about July 26, 2013-Job site at 37-14 29th Street Long Island City 11101 NY     The employees were using disposable N95 respirators without a written respiratory program.     WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.134 E01

Other-than-serious 1 instance 3 exposed
Issued
Dec 19, 2013
Abate by
Feb 7, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.134(e)(1):  The employer did not provide a medical evaluation to determine the   employees ability to use a respirator, before the employee was fit tested or required to use the   respirator in the workplace:  a)    On or about July 26, 2013-Job site at 37-14 29th Street Long Island City 11101 NY    Employees used disposable N95 respirators without medical monitoring.     WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.134 K03

Other-than-serious 1 instance 3 exposed
Issued
Dec 19, 2013
Abate by
Feb 7, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.134(k)(3):  Training was not provided prior to requiring employees to use a respirator   in the workplace:  a)    On or about July 26, 2013-Job site at 37-14 29th Street Long Island City 11101 NY     Employees used disposable N95 respirators without training.      WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Kerns Manufacturing Corp.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339247694.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.