ORMOND BEACH, FL —
OSHA Inspection: EUROSPORT DAYTONA, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of EUROSPORT DAYTONA, INC. in 355 TOMOKA AVE., ORMOND BEACH, FL 32174 (NAICS 332999). OSHA activity number 339248288.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EUROSPORT DAYTONA, INC.
- Site address
- 355 TOMOKA AVE.
- City
- ORMOND BEACH
- State
- FL
- ZIP
- 32174
- Mailing
- 355 TOMOKA AVE., ORMOND BEACH, FL 32174
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 13
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A03 II
- Issued
- Aug 16, 2013
- Abate by
- Aug 26, 2013
- Penalty
- Initial $1,700 · Current $950 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a. On or about August 1, 2013, shop, the drill bit was not guarded, exposing employees to the point of operations. Abatement Certification and Documentation are not required
Recent events (2)
- — I (S) $950
- — Z (S) $1700
1910.212 B
- Issued
- Aug 16, 2013
- Abate by
- Aug 26, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: a. On or about July 30, 2013, in the shop, the drill press was not secured to the floor to prevent moving. Abatement Certification and Documentation are not required
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 A02
- Issued
- Aug 16, 2013
- Abate by
- Aug 26, 2013
- Penalty
- Initial $1,700 · Current $950 Reduced
General-duty citation text
29 CFR 1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections: a. On or about July 30, 2013, in the shop, the bench grinder did not have a spindle nut guard in place, exposing the employees to the point of operations. Abatement Certification and Documentation are not required
Recent events (2)
- — I (S) $950
- — Z (S) $1700
1910.215 A04
- Issued
- Aug 16, 2013
- Abate by
- Aug 26, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: a. On or about July 30, 2013, in the shop, the bench grinder did not have a work rest. Abatement Certification and Documentation are not required
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 B09
- Issued
- Aug 16, 2013
- Abate by
- Aug 26, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a. On or about July 30, 2013, in the shop, the bench grinder did not have a guard, exposing the employees to the point of operations. Abatement Certification and Documentation are not required
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Eurosport Daytona, INC.
View Eurosport Daytona, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339248288.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.