DALLAS, TX —
OSHA Inspection: SPRING ENGINEERS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SPRING ENGINEERS, INC. in 1601 TERRE COLONY COURT, DALLAS, TX 75212 (NAICS 332312). OSHA activity number 339248411.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SPRING ENGINEERS, INC.
- Site address
- 1601 TERRE COLONY COURT
- City
- DALLAS
- State
- TX
- ZIP
- 75212
- Mailing
- 1601 TERRE COLONY COURT, DALLAS, TX 75212
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 80
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.22 B01
- Issued
- Jan 28, 2014
- Abate by
- Feb 5, 2014
- Penalty
- Initial $2,800 · Current $800 Reduced
General-duty citation text
29 CFR 1910.22(b)(1): Where mechanical handling equipment is used, sufficient safe clearances were not allowed for aisles, at loading docks, through doorways and wherever turns or passage must be made. Aisles and passageways were not kept clear and in good repairs, with no obstruction across or in aisles that could create a hazard: The employer did not ensure that sufficient safe clearances were used for aisles. This violation was observed on July 31, 2013, where the loading dock aisle was obstructed and not kept clear.
Recent events (2)
- — I (S) $800
- — Z (S) $2800
1910.133 A01
- Issued
- Jan 28, 2014
- Abate by
- Feb 5, 2014
- Penalty
- Initial $4,900 · Current $1,700 Reduced
General-duty citation text
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: The employer did not provide eye protection for employees working in the sanding area. This violation was observed on July 31, 2013, where employees sanding metal parts were exposed to eye injuries.
Recent events (2)
- — I (S) $1700
- — Z (S) $4900
1910.212 A01
- Issued
- Jan 28, 2014
- Abate by
- Feb 5, 2014
- Penalty
- Initial $4,900 · Current $1,700 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: The employer did not provide machine guards for employees working on the (2) Kalamazoo sanding machines. This violation was observed on July 31, 2013, where employees performed sanding of metal parts were not protected from point of operation, ingoing nip points, rotating parts, flying chips and sparks.
Recent events (2)
- — I (S) $1700
- — Z (S) $4900
1910.212 A03 II
- Issued
- Jan 28, 2014
- Abate by
- Feb 5, 2014
- Penalty
- Initial $4,900 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): This violation was observed on July 31, 2013, at the employer's workplace; where employees working with machinery were not protected from the danger zone during operating cycle(s) exposed to amputations: a. Assembly Area: Employees operating an Atlantic press brake, model number HDE60-8, serial number 57893; b. Assembly Area: Employees operating an Atlantic press brake, model number HDE2008, serial number 91470 b. Tooling Area: Employees operating a Powermatic drill press, model #1200-77, serial #20V309.
Recent events (2)
- — I (S) $0
- — Z (S) $4900
More inspections at Spring Engineers, INC.
View Spring Engineers, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339248411.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.