OCEANSIDE, NY —
OSHA Inspection: MPV ENTERPRISES, INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MPV ENTERPRISES, INC in 586 GERBY DRIVE S., OCEANSIDE, NY 11572 (NAICS 238140). OSHA activity number 339251639.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MPV ENTERPRISES, INC
- Site address
- 586 GERBY DRIVE S.
- City
- OCEANSIDE
- State
- NY
- ZIP
- 11572
- Mailing
- 264 N. BOSTON AVE., NORTH MASSAPEQUA, NY 11758
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 3
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.451 C02 IV
- Issued
- Aug 21, 2013
- Abate by
- Aug 27, 2013
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.451(c)(2)(iv): Front-end loaders and similar pieces of equipment were used to support scaffold platforms when they were not specifically designed by the manufacturer for such use: a) Worksite - An employees was grinding mortar from a pallet on the forks of a Lull Telehandler, Model # 622-4, Serial # JDS 38THD, approximately 14 feet above the ground; on or about 08/06/13. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (3)
- — F (S) $1000
- — C (S) $2000
- — Z (S) $2000
1926.602 C01 VIII A
- Issued
- Aug 21, 2013
- Abate by
- Aug 27, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.602(c)(1)(viii)(A): The industrial truck was not equipped with a safety platform/cage firmly secured to the lifting carriage and/or forks when used for lifting personnel: a) Worksite - An employees was grinding mortar from a pallet on the forks of a Lull Telehandler, Model # 622-4, Serial # JDS 38THD, approximately 14 feet above the ground; on or about 08/06/13. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1926.451 G01 VII
- Issued
- Aug 21, 2013
- Abate by
- Aug 27, 2013
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section. a) Worksite - An employees was grinding mortar, from a pallet on the forks of a Lull Telehandler, Model # 622-4, Serial # JDS 38THD, approximately 14 feet above the ground without fall protection; on or about 08/06/13. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (3)
- — F (S) $1000
- — C (S) $2000
- — Z (S) $2000
1926.602 D
- Issued
- Aug 21, 2013
- Abate by
- Sep 10, 2013
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.602(d): The employer did not certify that each operator had been trained and evaluated as required by paragraph 29 CFR 1910.178(l): Note: The requirements applicable to construction work under paragraph (d) of this section are identical to those set forth at paragraph (l) of 29 CFR 1910.178. Worksite - An employees was grinding mortar from a pallet on the forks of a Lull Telehandler, Model # 622-4, Serial # JDS 38THD, approximately 14 feet above the ground. The employee was not trained; on or about 08/06/13. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (3)
- — F (S) $1000
- — C (S) $2000
- — Z (S) $2000
More inspections in this industry (NAICS 238140)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339251639.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.