BELLMORE, NY —
OSHA Inspection: FINE LINE CONSTRUCTION INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of FINE LINE CONSTRUCTION INC. in 2459 HORACE CT., BELLMORE, NY 11710 (NAICS 236118). OSHA activity number 339255838.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FINE LINE CONSTRUCTION INC.
- Site address
- 2459 HORACE CT.
- City
- BELLMORE
- State
- NY
- ZIP
- 11710
- Mailing
- 39 BROOKSITE DR., SMITHTOWN, NY 11787
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236118
- Employees
- 9
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.100 A
- Issued
- Sep 3, 2013
- Abate by
- Sep 9, 2013
- Penalty
- Initial $1,200 · Current $840 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: a) Worksite, 2459 Horace Ct. Bellmore NY - Employees were not wearing protective helmets and were exposed to being struck by overhead materials and tools while walking below overhead siding work; on or about 08/7/13. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
- — I (S) $840
- — Z (S) $1200
1926.451 F06
- Issued
- Sep 3, 2013
- Abate by
- Sep 9, 2013
- Penalty
- Initial $2,800 · Current $1,960 Reduced
General-duty citation text
29 CFR 1926.451(f)(6): Scaffolds were erected, used, dismantled, altered, or moved such that they, or any conductive material handled on them, could have come closer than the minimum distances established for specific voltages as set forth in the table in subparagraph (f)(6).Note: Specify distances as indicated in table in paragraph (f)(6) of this section. a) Worksite, 2459 Horace Ct. Bellmore NY - Employees were installing siding on a residential home while walking and working on a pump jack scaffold. The employee was working less than 2ft away from an energized 220V power line; on or about 08/07/13. Note: In addition to abatement certification the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.
Recent events (2)
- — I (S) $1960
- — Z (S) $2800
1926.451 G01 VII
- Issued
- Sep 3, 2013
- Abate by
- Sep 9, 2013
- Penalty
- Initial $2,000 · Current $1,400 Reduced
General-duty citation text
29 CFR 1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section. a) Worksite, 2459 Horace Ct. Bellmore NY - Employees were exposed to falling while working from the platform of a pump jack scaffold, approximately 12ft above the ground below; on or about 08/07/13. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
- — I (S) $1400
- — Z (S) $2000
1926.454 A
- Issued
- Sep 3, 2013
- Abate by
- Sep 13, 2013
- Penalty
- Initial $1,600 · Current $1,120 Reduced
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. a) Worksite, 2459 Horace Ct. Bellmore NY - Employees were installing siding on s residential home while working from the platform of a pump jack scaffold. The employees were not trained to recognize the hazards associated with the scaffold; on or about 08/07/13. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
- — I (S) $1120
- — Z (S) $1600
More inspections at Fine Line Construction INC.
View Fine Line Construction INC.'s full OSHA safety record →
More inspections in this industry (NAICS 236118)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339255838.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.