Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: GARY'S SHEET METAL WORKS

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of GARY'S SHEET METAL WORKS in 5421 I-10 EAST FRWY., BAYTOWN, TX 77521 (NAICS 238160). OSHA activity number 339279432.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Gary'S Sheet Metal Works — free Get an email when a new federal OSHA severe-injury report for Gary'S Sheet Metal Works is published. One employer, no account, unsubscribe in one click.
Site address
5421 I-10 EAST FRWY.
City
BAYTOWN
State
TX
ZIP
77521
Mailing
PO BOX 945, WALLER, TX 77484
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
4
Ownership type
A

2 citations on file for this inspection.

1926.501 B01

Serious Gravity 10 1 instance 2 exposed
Issued
Aug 23, 2013
Abate by
Sep 3, 2013
Penalty
Initial $2,800 · Current $1,680 Reduced
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:   The employer does not ensure that each employee on a walking/working surface with an unprotected side or edge which is 6 feet or more above a lower level is protected from falling. This violation was observed on or about August 9, 2013, on the south side of the building where an employee was exposed to a fall hazard of more than 6 feet when installing gutters on a UPS building without a fall protection system.     Pursuant to 29 C.F. R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that each employee on a walking/working surface with an unprotected side or edge which is 6 feet or more above a lower level is protected from falling.
Recent events (2)
  • — I (S) $1680
  • — Z (S) $2800

1926.1053 B01

Serious Gravity 10 1 instance 2 exposed
Issued
Aug 23, 2013
Penalty
Initial $2,800 · Current $1,680 Reduced
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:    The employer does not ensure that when a portable ladder is used for access to an upper landing surface, the ladder side rails extend at least 3 feet above the upper landing surface to which the ladder is used to gain access.  This violation was observed on or about August 9, 2013, on the west side of the UPS building where employees were exposed to a fall hazards when using an extension ladder to access a roof to remove and install gutters without extending the ladder 3 feet beyond the landing of the roof.       Pursuant to 29 C.F. R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that when a portable ladder is used for access to an upper landing surface, the ladder side rails extend at least 3 feet above the upper landing surface to which the ladder is used to gain access.
Recent events (2)
  • — I (S) $1680
  • — Z (S) $2800

View Gary'S Sheet Metal Works's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339279432.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.