Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,194,531Inspections Most recent open 2026-08-11 Last loaded 2026-08-14

OSHA Inspection: ENTERPRISE PRODUCTS PARTNERS L.P.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of ENTERPRISE PRODUCTS PARTNERS L.P. in CENTRAL TREATING FACILITY 1250 COUNTY ROAD 69, RIFLE, CO 81650 (NAICS 211112). OSHA activity number 339288474.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Enterprise Products Partners L.P. for free Get an email when a new federal OSHA severe-injury report for Enterprise Products Partners L.P. is published. One employer, no account, unsubscribe in one click.
Site address
CENTRAL TREATING FACILITY 1250 COUNTY ROAD 69
City
RIFLE
State
CO
ZIP
81650
Mailing
104 CARDINAL WAY, PARACHUTE, CO 81635
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
211112
Employees
4
Ownership type
Private (A)

4 citations on file for this inspection.

1910.134 E01

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Jan 28, 2014
Penalty
Initial $3,400 · Current $0 Reduced
29 CFR 1910.134(f)(2): The employer did not ensure that employees using a tight-fitting facepiece respirator were fit tested prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) is used, or at least annually thereafter:  (a) Enterprise Products Partners L.P. at 1250 County Road 69, Rifle CO: On and before 8/1/13, the employer did not ensure that employees required to use a tight-fitting facepiece respirator were fit tested annually.  The employer required employees to wear a tight-fitting respirator during operations such as, but not limited to, sludge catcher filter change and TEG filter change.  This condition potentially exposed employees to a respiratory hazard due to improper fit of the respirator.
Recent events (2)
  • · I (S) $0
  • · Z (S) $3400

1910.1028 E02 I

Other-than-serious 1 instance 7 exposed
Issued
Jan 28, 2014
Abate by
May 1, 2014
Penalty
Initial $0 · Current $3,400
29 CFR 1910.1028(e)(2)(i): The employer did not monitor each workplace and work operation to determine accurately the airborne concentrations of benzene to which employees may be exposed:    (a) Enterprise Products Partners L.P. at 1250 County Road 69, Rifle CO: On and before 8/1/13, the employer did not monitor each workplace and work operation to determine accurately the airborne concentrations of benzene to which employees may be exposed.  The employer did not accurately determine employee exposure during operations such as, but not limited to, sludge catcher filter change and inlet scrubber filter change.  This condition potentially exposed employees to a respiratory hazard associated with benzene exposure.
Recent events (2)
  • · I (O) $3400
  • · Z (S) $0

1910.1028 E01 II

Deleted Serious Gravity 5 1 instance 7 exposed
Issued
Jan 28, 2014
Abate by
May 1, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.1028(e)(1)(ii): Representative 8-hour TWA employee exposures were not determined on the basis of one sample or samples representing the full shift exposure for each job classification in each work area:                                   (a) Enterprise Products Partners L.P. at 1250 County Road 69, Rifle CO: On and before 8/1/13, the employer did not determine representative 8-hour TWA employee exposures on the basis of one sample or samples representing the full shift exposure for each job classification in each work area.  The employer did not accurately determine employee exposure during operations such as, but not limited to, sludge catcher filter change and inlet scrubber filter change.  This condition potentially exposed employees to a respiratory hazard associated with benzene exposure.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.1028 E01 III

Deleted Serious Gravity 5 1 instance 7 exposed
Issued
Jan 28, 2014
Abate by
May 1, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.1028(e)(1)(iii): Determinations of compliance with the STEL were not made from 15-minute employee breathing zone samples measured at operations where there was reason to believe exposures were high:                     (a) Enterprise Products Partners L.P. at 1250 County Road 69, Rifle CO: On and before 8/1/13, the employer did not take 15-minute employee breathing zone samples where there was a reason to believe exposures were high.  The employer did not accurately determine employee exposure during operations such as, but not limited to, sludge catcher filter change and inlet scrubber filter change.  This condition potentially exposed employees to a respiratory hazard associated with benzene exposure.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

View Enterprise Products Partners L.P.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339288474.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.