NAMPA, ID —
OSHA Inspection: INDUSTRIAL VENTILATION, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of INDUSTRIAL VENTILATION, INC. in 723 E. KARCHER RD., NAMPA, ID 83687 (NAICS 333415). OSHA activity number 339298846.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- INDUSTRIAL VENTILATION, INC.
- Site address
- 723 E. KARCHER RD.
- City
- NAMPA
- State
- ID
- ZIP
- 83687
- Mailing
- 723 E. KARCHER RD., NAMPA, ID 83687
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333415
- Employees
- 6
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C06 I
- Issued
- Sep 6, 2013
- Abate by
- Oct 2, 2013
- Penalty
- Initial $3,570 · Current $1,785 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) Fabrication Shop: On August 7, 2013, and times prior thereto, the employer did not conduct a periodic inspection of energy control procedures for shop equipment including the Niagra Press. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $1785
- — Z (S) $3570
1910.147 C07 I
- Issued
- Sep 6, 2013
- Abate by
- Oct 2, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees: a) Fabrication Shop: On August 7, 2013, and times prior thereto, employees that were using and performing maintenance on shop equipment including a Niagra Press, were not familiar with the purpose and function of LOTO and did not know where to find the LOTO checklist that was in direct view and attached to the equipment or where to get the LOTO devices for the equipment. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.217 E01 I
- Issued
- Sep 6, 2013
- Abate by
- Oct 2, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.217(e)(1)(i): A program of periodic and regular inspections of mechanical power press(es) was not established and followed to ensure that all parts, auxiliary equipment and safeguards were in a safe operating condition and adjustment: a) Fabrication Shop: On August 7, 2013, and times prior thereto, employees were using a Niagra Press that did not have an established program of periodic and regular inspections to ensure that all parts and safeguards were in a safe operating condition. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A03 IV B
- Issued
- Sep 6, 2013
- Abate by
- Oct 2, 2013
- Penalty
- Initial $2,380 · Current $1,190 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(iv)(b): Metal shear equipment did not have point of operation guarding as required. a) Fabrication Shop Mezzanine area: On August 7, 2013, and times prior thereto, employees were using a Pexto manual pedal shear without a point of operation guard. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $1190
- — Z (S) $2380
1910.215 B05
- Issued
- Sep 6, 2013
- Abate by
- Oct 2, 2013
- Penalty
- Initial $1,785 · Current $893 Reduced
General-duty citation text
29 CFR 1910.215(b)(5): The angular exposure of grinding wheel periphery and slides for safety guards used on cutting-off machine(s) employing the wheel periphery exceeded 150 degrees: a) South end of fabrication shop: On August 7, 2013, and times prior thereto, employees were using a Continental Machine Tool cut-off saw that did not have a periphery guard on the wheel during operation. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $892.5
- — Z (S) $1785
1910.212 B
- Issued
- Sep 6, 2013
- Abate by
- Oct 2, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: a) Fabrication Shop: On August 7, 2013, and times prior thereto, employees were using a Baldor abrasive wheel bench grinder that was not anchored. Note: Abatement certification is required for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Industrial Ventilation, INC.
View Industrial Ventilation, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333415)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339298846.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.