KANSAS CITY, MO —
OSHA Inspection: MAY TOOL & MOLD COMPANY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MAY TOOL & MOLD COMPANY, INC. in 2922 WHEELING, KANSAS CITY, MO 64129 (NAICS 332710). OSHA activity number 339303547.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MAY TOOL & MOLD COMPANY, INC.
- Site address
- 2922 WHEELING
- City
- KANSAS CITY
- State
- MO
- ZIP
- 64129
- Mailing
- 2922 WHEELING, KANSAS CITY, MO 64129
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 114
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.212 A01
- Issued
- Aug 30, 2013
- Abate by
- Oct 5, 2013
- Penalty
- Initial $2,295 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Production Room: The Hercules Footswitch used with the Buffer by the 166/167 Mitsubishi did not have the foot pedal guarded from unintended operation as the cover for the foot pedal was broken off.
Recent events (3)
- — F (S) $0
- — C (S) $2295
- — Z (S) $2295
1910.219 D01
- Issued
- Aug 30, 2013
- Abate by
- Oct 5, 2013
- Penalty
- Initial $3,060 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): (a) Tool Room: Pulleys for the Bridgeport #1 Milling Machine were not guarded within seven feet of the floor. Belts and pulleys create an ingoing nippoint which was not guarded. b) Tool Room: Pulleys for the Bridgeport #2 Milling Machine were not guarded within seven feet of the floor. Belts and pulleys create an ingoing nippoint which was not guarded. c) Tool Room: Pulleys for the Bridgeport #9 Milling Machine were not guarded within seven feet of the floor. Belts and pullets create an ingoing nippoint which was not guarded.
Recent events (3)
- — F (S) $0
- — C (S) $3060
- — Z (S) $3060
1910.219 E01 I
- Issued
- Aug 30, 2013
- Abate by
- Oct 5, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt: (a) Tool Room: The Bridgeport Milling Machine #1, did not have the horizontal belts guarded within seven feet of the floor. Belts and pulleys create an ingoing nippoint which was not guarded.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.303 B02
- Issued
- Aug 30, 2013
- Abate by
- May 1, 2014
- Penalty
- Initial $2,295 · Current $1,148 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: (a) Production Room, Aisle next to 166/167 Mitsubishi: There were metal boxes with prepunched knockouts being used as pendants which were not listed or labelled to be used in this manner. Metal boxes with prepunched knockouts are listed or labelled to be attached to a wall or piece of equipment.
Recent events (3)
- — F (O) $1147.5
- — C (S) $2295
- — Z (S) $2295
1910.305 B01 II
- Issued
- Aug 30, 2013
- Abate by
- May 1, 2014
- Penalty
- Initial $2,295 · Current $1,148 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: (a) Northwest Corner of Tool Room by the Emergency Exit: The prepunched knockout had an opening which was not closed for the lightswitch box for the overhead florescent light. (b) North Side of Tool Room: The Dake Hydraulic Press Power Cabinet had an opening that was not closed.
Recent events (3)
- — F (O) $1147.5
- — C (S) $2295
- — Z (S) $2295
1910.305 G02 III
- Issued
- Aug 30, 2013
- Abate by
- May 1, 2014
- Penalty
- Initial $2,295 · Current $0 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: (a) Tool Room: The cord to the plug-in for the Dake Hydraulic Press did not have adequate strain relief as the outer insulation had pulled back exposing interior wiring exposing employees to electrical hazards.
Recent events (3)
- — F (O) $0
- — C (S) $2295
- — Z (S) $2295
More inspections at MAY Tool & Mold Company, INC.
View MAY Tool & Mold Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339303547.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.