GRANDVIEW, MO ·
OSHA Inspection: BURGER & BROWN ENGINEERING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BURGER & BROWN ENGINEERING, INC. in 4500 EAST 142ND STREET, GRANDVIEW, MO 64030 (NAICS 332999). OSHA activity number 339303679.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BURGER & BROWN ENGINEERING, INC.
- Site address
- 4500 EAST 142ND STREET
- City
- GRANDVIEW
- State
- MO
- ZIP
- 64030
- Mailing
- 4500 EAST 142ND STREET, GRANDVIEW, MO 64030
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 49
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1910.215 B09
- Issued
- Sep 26, 2013
- Abate by
- Oct 23, 2013
- Penalty
- Initial $2,975 · Current $1,488 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (a) Automation behind South Bridgeport B5: Employees were exposed to the Dayton 7 inch Pedestal Grinder which had the right side facing tongue guard adjusted at greater than one fourth inch.
Recent events (2)
- · I (O) $1487.5
- · Z (S) $2975
1910.219 D01
- Issued
- Sep 26, 2013
- Abate by
- Oct 31, 2013
- Penalty
- Initial $2,380 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): (a) CNC Machining: Employees were exposed to the Bridgeport Milling machine which did not have the pulleys guarded. The belts and pulleys create an ingoing nippoint.
Recent events (2)
- · I (S) $0
- · Z (S) $2380
1910.219 E01 I
- Issued
- Sep 26, 2013
- Abate by
- Oct 31, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt: (a) CNC Machining: Employees were exposed to the Bridgeport Milling Machine which did not have the horizontal belts guarded. The ingoing nippoints created by the belts and pulleys were not guarded.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.304 G05
- Issued
- Sep 26, 2013
- Penalty
- Initial $2,975 · Current $0 Reduced
General-duty citation text
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective: (a) Swiss Machining: Employees were exposed to electrical hazards as the Kalamazoo Industries Belt Sander with the Baldor Motor was not grounded as the grounding pin was absent.
Recent events (2)
- · I (S) $0
- · Z (S) $2975
More inspections at Burger & Brown Engineering, INC.
View Burger & Brown Engineering, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339303679.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.