ELMIRA, NY —
OSHA Inspection: CARBAUGH TOOL CO. INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CARBAUGH TOOL CO. INC. in 126 PHILO ROAD W, ELMIRA, NY 14903 (NAICS 332710). OSHA activity number 339326704.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CARBAUGH TOOL CO. INC.
- Site address
- 126 PHILO ROAD W
- City
- ELMIRA
- State
- NY
- ZIP
- 14903
- Mailing
- 126 PHILO ROAD W, ELMIRA, NY 14903
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 25
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.178 L04 III
- Issued
- Sep 10, 2013
- Abate by
- Oct 13, 2013
- Penalty
- Initial $1,200 · Current $720 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a) Carbaugh Tool Company Inc., on or about 8/20/2013: The Employer did not provide a performance evaluation of each powered industrial truck operator at least every three years.
Recent events (2)
- — I (S) $720
- — Z (S) $1200
1910.212 A01
- Issued
- Sep 10, 2013
- Abate by
- Oct 13, 2013
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Original Shop, on or about 8/20/13: (4) Four Bridgeport milling machines were not provided with chuck and tool guards. b) Original Shop, on or about 8/20/13: Hardinge Chucker was not provided with a guard over the collet closer and spindle. c) Original Shop, on or about 8/20/13: Clausing lathe was not provided with a guard to cover the serrated chuck and tooling. d) Assembly Room, on or about 8/20/13: Clausing drill press was not provided with a chuck guard. e) Assembly Room, on or about 8/20/13: Bridgeport milling machine was not provided with a chuck and tool guard. f) Milling Area near Break Room, on or about 8/20/13: (4) Four Bridgeport milling machines were not provided with chuck and tool guards. g) Milling Area near Break Room, on or about 8/20/13: Moore milling machine was not provided with a chuck and tool guard.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1910.219 D01
- Issued
- Sep 10, 2013
- Abate by
- Oct 13, 2013
- Penalty
- Initial $1,200 · Current $720 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) Original Shop, on or about 8/20/13: Crystal Lakes Griinder was not provided with guarding at the in-running nip points where the belt and pulley meet.
Recent events (2)
- — I (S) $720
- — Z (S) $1200
1910.219 E03 I
- Issued
- Sep 10, 2013
- Abate by
- Oct 13, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): a) Original Shop, on or about 8/20/13: Crystal Lakes Griinder was not provided with guarding at the in-running nip points where the belt and pulley meet.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Carbaugh Tool CO. INC.
View Carbaugh Tool CO. INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339326704.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.