DESTIN, FL ·
OSHA Inspection: AXIOS COMPANIES, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of AXIOS COMPANIES, LLC in 862-832 HIGHWAY 98 EAST, DESTIN, FL 32541 (NAICS 236220). OSHA activity number 339371239.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AXIOS COMPANIES, LLC
- Site address
- 862-832 HIGHWAY 98 EAST
- City
- DESTIN
- State
- FL
- ZIP
- 32541
- Mailing
- 150 INDUSTRIAL BLVD. SUITE 1, DESTIN, FL 32541
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236220
- Employees
- 9
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1926.102 A01
- Issued
- Sep 10, 2013
- Penalty
- Initial $1,020 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents: a. On or about August 29, 2013, inside the building, the employee using the table saw to cut wood did not have on safety glasses, exposing himself to eye injuries. Abatement Certification and Documentation are not required
Recent events (2)
- · I (S) $1000
- · Z (S) $1020
1926.304 H01
- Issued
- Sep 10, 2013
- Penalty
- Initial $1,200 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.304(h)(1): Each circular crosscut table saw was not guarded by a hood which completely enclosed that portion of the saw blade above the table and that portion of the saw above the material being cut: a. On or about August 29, 2013, inside the building, employees were using a Ridgid table saw to cut 2 x 4's. The table saw did not have the hood, exposing employees to amputation hazards. Abatement Certification and Documentation are not required
Recent events (2)
- · I (S) $1000
- · Z (S) $1200
1926.451 B01
- Issued
- Sep 10, 2013
- Penalty
- Initial $2,800 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii): a. On or about August 29, 2013, front of the building, the two buck high scaffold system was not fully planked on the top working level, exposing the employee to a 12 feet fall hazard. Abatement Certification and Documentation are not required
Recent events (2)
- · I (S) $1000
- · Z (S) $2800
1926.451 E01
- Issued
- Sep 10, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, sturcure, personnel hoist, or similar surface was not used: a. On or about August 29, 2013, front of the building, the two buck high scaffold system did not have a safe means of access and egress because there was no ladder. The employees climbed the scaffold rungs. Abatement Certification and Documentation are not required
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.451 G01
- Issued
- Sep 10, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level were not protected from falling to that lower level: a. On or about August 29, 2013, front of the building, the employee working from a two buck high scaffold system was not protected from falling 12 feet by the use of a guardrail system, safety net system, personal fall arrest system or any other alternative fall protection system. Abatement Certification and Documentation are not required
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections in this industry (NAICS 236220)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339371239.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.