BELLE CHASSE, LA —
OSHA Inspection: C & C MARINE AND REPAIR, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of C & C MARINE AND REPAIR, LLC in 701 ENGINEERS RD., BELLE CHASSE, LA 70037 (NAICS 336611). OSHA activity number 339396079.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch C & C Marine and Repair, LLC — free
Get an email when a new federal OSHA severe-injury report for C & C Marine and Repair, LLC is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- C & C MARINE AND REPAIR, LLC
- Site address
- 701 ENGINEERS RD.
- City
- BELLE CHASSE
- State
- LA
- ZIP
- 70037
- Mailing
- 701 ENGINEERS RD., BELLE CHASSE, LA 70037
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336611
- Employees
- 80
- Ownership type
- A
Citations
11 citations on file for this inspection.
1910.178 L01 I
- Issued
- Oct 17, 2013
- Abate by
- Dec 5, 2013
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) Throughout the facility; On or about 9/5/13, the employer failed to train forklift operators on the operation of Toyota forklifts and other forklift types used in the facility.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.180 D03 III
- Issued
- Oct 17, 2013
- Abate by
- Oct 31, 2013
- Penalty
- Initial $3,500 · Current $1,050 Reduced
General-duty citation text
29 CFR 1910.180(d)(3)(iii): Frequesnt Inspections were not conducted to identify whether safety devices were fully functioning. a) Dry dock; On or about 9/05/13, an employee was allowed to operate a Manitowoc 3900 crane without having the moving parts such as but not limited to the engine fully enclosed to prevent inadvertent contact.
Recent events (2)
- — I (S) $1050
- — Z (S) $3500
1910.180 C02
- Issued
- Oct 17, 2013
- Abate by
- Oct 31, 2013
- Penalty
- Initial $4,900 · Current $2,450 Reduced
General-duty citation text
29 CFR 1910.180(c)(2): The cab(s) of crawler crane(s) were not provided with a load rating chart with clearly legible letters and figures which was easily visible to the operator while seated at the control station: a) Dry dock; employees were allowed to operate cranes without having a load rating chart available to the operator. 1. American 9225 crane 2. American 9310 crane 3. Manitowoc 3900 crane 4. Manitowoc 4600 crane
Recent events (2)
- — I (S) $2450
- — Z (S) $4900
1910.180 D04
- Issued
- Oct 17, 2013
- Abate by
- Dec 5, 2013
- Penalty
- Initial $4,900 · Current $0 Reduced
General-duty citation text
29 CFR 1910.180(d)(4): Complete inspection(s) of crane(s) were not performed at intervals as generally defined in 1910.180(d)(ii) with a determination made as to whether deficiencies constituted a safety hazard: a) Dry dock; On or about 9/05/13, the employer allowed employees to operate cranes while not having a current annual inspection or periodic inspections performed. 1. American 9225 crane 2. American 9310 crane 3. Manitowoc 3900 crane 4. Manitowoc 4600 crane
Recent events (2)
- — I (S) $0
- — Z (S) $4900
1910.212 A03 II
- Issued
- Oct 17, 2013
- Abate by
- Nov 12, 2013
- Penalty
- Initial $2,100 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Bay 6; a Central Machinery Drill Press did not have a guard around the bit to prevent a point of operation injury.
Recent events (2)
- — I (S) $0
- — Z (S) $2100
1910.305 B02 I
- Issued
- Oct 17, 2013
- Abate by
- Oct 31, 2013
- Penalty
- Initial $2,100 · Current $1,050 Reduced
General-duty citation text
29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy: a) Bay 3; Two electrical boxes connected to the overhead doors were missing covers. b) Bay 5; Electrical box connected to bay door was missing cover.
Recent events (2)
- — I (S) $1050
- — Z (S) $2100
1910.306 K02 VI
- Issued
- Oct 17, 2013
- Abate by
- Oct 29, 2013
- Penalty
- Initial $2,100 · Current $0 Reduced
General-duty citation text
29 CFR 1910.306(k)(2)(vi): Flexible cords and cables shall be continuous without splice or tap between boxes or fittings. Cord connectors may not be laid on the ground unless listed for wet locations. Connectors and cable connections may not be placed in audience traffic paths or within areas accessible to the public unless guarded. a) Bay 7; On or about 9/5/13, the electrical cord of a fan was spliced without providing an insulating device equivalent to that of the conductors or otherwise designed for the purpose.
Recent events (2)
- — I (S) $0
- — Z (S) $2100
1915.89 D01
- Issued
- Oct 17, 2013
- Abate by
- Dec 5, 2013
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1915.89(d)(1): The employer shall establish and implement written procedures to prevent energization or startup, or the release of hazardous energy, during the servicing of any machinery, equipment, or system. a) Bay 1; the employer did not develop written procedures with specific steps for the control of potentially hazardous energy regarding machines and equipment such as, but not limited to: 1. Band Saw - electrical and pneumatic energy sources 2. Two Plasma Cutters - electrical and pneumatic energy sources 3. Seam Welder - electrical, hydraulic, and pneumatic energy sources 4. Dart Welder - electrical and pneumatic energy sources
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
1915.134 F
- Issued
- Oct 17, 2013
- Abate by
- Oct 31, 2013
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1915.134(f): When safety flanges are required, they shall be used only with wheels designed to fit the flanges. Only safety flanges of a type and design and properly assembled so as to insure that the pieces of the wheel will be retained in case of accidental breakage shall be used. a) Bay 5; On or about 9/05/13, the employer allowed employees to operate Dewalt side grinders while missing the guard.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.180 I05 I
- Issued
- Oct 17, 2013
- Abate by
- Oct 31, 2013
- Penalty
- Initial $700 · Current $350 Reduced
General-duty citation text
29 CFR 1910.180(i)(5)(i): A carbon dioxide, dry chemical, or equivalent fire extinguisher was not kept in the cab or the vicinity of the locomotive crane(s): a) Dry dock; On or about 9/5/13, employees were allowed to operate cranes without having a 5-BC rating or equivalent fire extinguisher accessible in the cab of the crane. 1. American 9225 crane 2. American 9310 crane 3. Manitowoc 3900 crane 4. Manitowoc 4600 crane
Recent events (2)
- — I (O) $350
- — Z (O) $700
1910.303 F02
- Issued
- Oct 17, 2013
- Abate by
- Oct 31, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: a) Bay 3; The employer failed to ensure that the individual breakers inside of electrical panel PLC feed from MDPC were labeled.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at C & C Marine and Repair, LLC
View C & C Marine and Repair, LLC's full OSHA safety record →
More inspections in this industry (NAICS 336611)
Jul 14, 2026
Detyens Shipyards, INC. · NORTH CHARLESTON, SC
Jul 14, 2026
Lake Shore Systems, INC DBA Trident Maritime Systems · KINGSFORD, MI
Jul 10, 2026
Conrad Shipyard, LLC · AMELIA, LA
Jul 9, 2026
Palfinger Marine USA INC. · PORTSMOUTH, VA
Jul 7, 2026
Applied Concepts Unleashed, INC. · STUART, FL
More inspections in LA
Jul 15, 2026
SE Tylose USA, INC. · PLAQUEMINE, LA
Jul 15, 2026
Gulley'S Welding & Steel Erectors, INC. · LAFAYETTE, LA
Jul 15, 2026
Acorrea Company, LLC · LAFAYETTE, LA
Jul 14, 2026
Gulf Coast Woodwork, L.L.C. · LAFAYETTE, LA
Jul 14, 2026
Oxychem · BELLE ROSE, LA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339396079.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.