KANSAS CITY, MO —
OSHA Inspection: LABCONCO CORPORATION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of LABCONCO CORPORATION in 8811 PROSPECT AVENUE, KANSAS CITY, MO 64108 (NAICS 337127). OSHA activity number 339413809.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LABCONCO CORPORATION
- Site address
- 8811 PROSPECT AVENUE
- City
- KANSAS CITY
- State
- MO
- ZIP
- 64108
- Mailing
- 8811 PROSPECT AVENUE, KANSAS CITY, MO 64108
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337127
- Employees
- 180
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.22 D01
- Issued
- Sep 30, 2013
- Abate by
- Nov 2, 2013
- Penalty
- Initial $2,295 · Current $0 Reduced
General-duty citation text
29 CFR 1910.22(d)(1): On every building or other structure, or part thereof, used for mercantile, business, industrial or storage purposes, the loads approved by the building official were not marked on plates of approved design and securely affixed in a conspicuous place in each space to which they relate: (a) Purifier Assembly Line, South Building, Small Enclosure Line: Employees were exposed to the walkway underneath the racking which did not have a load rating. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- — I (S) $0
- — Z (S) $2295
1910.303 B02
- Issued
- Sep 30, 2013
- Penalty
- Initial $2,295 · Current $1,148 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: (a) Plenums Subassembly: Employees were exposed to electrical hazards as one Belkin power strip was piggybacked into another Belkin power strip which was not being used per listing or labeling. A power strip is listed or labeled to be plugged directly into the wall. This violation was abated during inspection. Abatement certification for this violation is not required.
Recent events (2)
- — I (O) $1147.5
- — Z (S) $2295
1910.305 G01 IV
- Issued
- Sep 30, 2013
- Abate by
- Nov 2, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv): Flexible cords and/ or cables were used for purposes prohibited by paragraphs (A) through (F) of 29 CFR 1910.305(g)(1)(iv): (a) Plenums Subassembly: Employees were exposed to electrical hazards as the Belkin power strip was attached to the work station. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.304 G05
- Issued
- Sep 30, 2013
- Abate by
- Nov 2, 2013
- Penalty
- Initial $2,295 · Current $1,148 Reduced
General-duty citation text
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective: (a) Metal Fabrication, South Building: Employees were exposed to electrical hazards as the pedestal fan was not grounded as the grounding pin was absent. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- — I (O) $1147.5
- — Z (S) $2295
1910.305 B01 II
- Issued
- Sep 30, 2013
- Abate by
- Nov 2, 2013
- Penalty
- Initial $2,295 · Current $0 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: (a) Metal Fabrication, South Building: Employees were exposed to electrical hazards as the Janda spot welder had an open knockout for the control box for the water solenoid. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- — I (S) $0
- — Z (S) $2295
1910.305 G02 III
- Issued
- Sep 30, 2013
- Abate by
- Nov 2, 2013
- Penalty
- Initial $2,295 · Current $0 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: (a) Machine Shop, South Building: The DeWalt hand drill did not have adequate strain relief as the cord was damaged where it attaches to the drill. (b) Machine Shop, South Building: The Dayton pedestal fan did not have adequate strain relief as the cord was damaged where it attaches to the plug-in. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- — I (S) $0
- — Z (S) $2295
More inspections at Labconco Corporation
View Labconco Corporation's full OSHA safety record →
More inspections in this industry (NAICS 337127)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339413809.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.