HUDSON, NY —
OSHA Inspection: ATLAS METAL WORKING CORP.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of ATLAS METAL WORKING CORP. in 4269 RTE 9, HUDSON, NY 12534 (NAICS 337122). OSHA activity number 339424756.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ATLAS METAL WORKING CORP.
- Site address
- 4269 RTE 9
- City
- HUDSON
- State
- NY
- ZIP
- 12534
- Mailing
- PO BOX 348, HUDSON, NY 12534
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337122
- Employees
- 10
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.134 C01
- Issued
- Jan 29, 2014
- Abate by
- Mar 18, 2014
- Penalty
- Initial $1,440 · Current $765 Reduced
General-duty citation text
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: (a) On or about 9/24/13 at Atlas Metalworking Corporation, for employees who welded on stainless steel. The employer required the use of N-95 respirators, but had not created a respiratory protection program.
Recent events (2)
- — I (S) $765
- — Z (S) $1440
1910.1026 D01
- Issued
- Jan 29, 2014
- Abate by
- May 1, 2014
- Penalty
- Initial $1,800 · Current $765 Reduced
General-duty citation text
29 CFR 1910.1026(d)(1): The employer with a workplace or work operation covered by this standard did not determine the 8-hour time-weighted average exposure for each employee exposed to chromium (VI): (a) On or about 9/24/13 at Atlas Metalworking Corporation, for employees who welded on stainless steel containing hexavalent chromium. The employer had not determined the time-weighted average exposure for these employees.
Recent events (2)
- — I (S) $765
- — Z (S) $1800
1910.1052 D02
- Issued
- Jan 29, 2014
- Abate by
- May 1, 2014
- Penalty
- Initial $1,800 · Current $765 Reduced
General-duty citation text
29 CFR 1910.1052(d)(2): The employer did not perform initial monitoring to determine each employee's exposure to methylene chloride: (a) On or about 9/24/13 at Atlas Metalworking Corporation, for employees attaching colored paneling to refridgerators with Premier PB 920 which contained methylene chloride. The employer did not perform initial monitoring to determine these employees' exposure.
Recent events (2)
- — I (S) $765
- — Z (S) $1800
1910.1200 E01
- Issued
- Jan 29, 2014
- Abate by
- Mar 18, 2014
- Penalty
- Initial $1,080 · Current $765 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (a) On or about 9/24/13 at Atlas Metalworking Corporation, for employees working with hazardous chemicals including but not limited to methylene chloride contained in PB 920, and hexavalent chromium produced when working on 316-type stainless steel. The employer did not have an effective hazard communication program.
Recent events (2)
- — I (O) $765
- — Z (S) $1080
1910.1200 G01
- Issued
- Jan 29, 2014
- Abate by
- Mar 18, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(1): The employer did not have a material safety data sheet for each hazardous chemical in use: (a) On or about 9/24/13 at Atlas Metalworking Corporation, for employees working with hazardous chemicals including but not limited to methylene chloride contained in PB 920, and hexavalent chromium produced when working on 316-type stainless steel. The employer did not have material safety data sheets available for each chemical in the work area.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.1200 H01
- Issued
- Jan 29, 2014
- Abate by
- Mar 18, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: (a) On or about 9/24/13 at Atlas Metalworking Corporation, for employees working with hazardous chemicals including but not limited to methylene chloride contained in PB 920, and hexavalent chromium produced when working on 316-type stainless steel. The employer did not train employees on the hazards of these chemicals in the work area.
Recent events (2)
- — I (O) $0
- — Z (S) $0
More inspections at Atlas Metal Working Corp.
View Atlas Metal Working Corp.'s full OSHA safety record →
More inspections in this industry (NAICS 337122)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339424756.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.