CROSSETT, AR ·
OSHA Inspection: RAM-FAB, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RAM-FAB, INC. in 150 HIGHWAY 133 SPUR, CROSSETT, AR 71635 (NAICS 332996). OSHA activity number 339427098.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RAM-FAB, INC.
- Site address
- 150 HIGHWAY 133 SPUR
- City
- CROSSETT
- State
- AR
- ZIP
- 71635
- Mailing
- 150 HIGHWAY 133 SPUR, CROSSETT, AR 71635
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332996
- Employees
- 60
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.146 E01
- Issued
- Oct 31, 2013
- Abate by
- Nov 18, 2013
- Penalty
- Initial $3,000 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.146(e)(1): Before entry was authorized, the employer did not document the completion of measures required by 29 CFR 1910.146(d)(3) by preparing an entry permit: Note: Appendix D to 29 CFR 1910.146 presents examples of permits whose elements are considered to comply with these requirements. On or about September 26, 2013 and times prior thereto employees were assigned to enter and entered permit required confined space such as but not limited to tanker trailers without preparing an entry permit documenting the required safe entry proceures.
Recent events (2)
- · I (S) $1800
- · Z (S) $3000
1910.146 D09
- Issued
- Oct 31, 2013
- Abate by
- Nov 18, 2013
- Penalty
- Initial $5,000 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.146(d)(9): Under the permit-required confined space program required by 29 CFR 1910.146(c)(4), the employer did not develop and implement procedures for summoning rescue and emergency services, for rescuing entrants from permit spaces to rescue: On or about September 26, 2013 and times prior thereto employer had employees entering permit confined spaces such as but not limited to tanker trailers without having a plan in place to rescue the entrant from the space should he/she become incapacitated.
Recent events (2)
- · I (S) $3000
- · Z (S) $5000
1910.178 L06
- Issued
- Oct 31, 2013
- Abate by
- Dec 17, 2013
- Penalty
- Initial $3,000 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): On or about September 26, 2013 and times prior thereto, employer did not have certification records that operators of powered inductrial trucks had been trained initially and evaluated within the last three years.
Recent events (2)
- · I (S) $1800
- · Z (S) $3000
1910.215 A04
- Issued
- Oct 31, 2013
- Abate by
- Nov 4, 2013
- Penalty
- Initial $3,000 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: On or about September 26, 2013 and times prior thereto employees wewre exposed to the hazards of a broken grinding wheel were the work rest was not adjusted to within 1/8 of an inch to the wheel on the off hand grinder in the weld area of Shop 1.
Recent events (2)
- · I (S) $1800
- · Z (S) $3000
1910.334 A03 I
- Issued
- Oct 31, 2013
- Abate by
- Nov 8, 2013
- Penalty
- Initial $5,000 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.334(a)(3)(i): A flexible cord used with grounding type equipment did not contain an equipment grounding conductor: On or about September 26, 2013 and times prior thereto employees were exposed to the hazards of an electrical shock from the floor fan in the the Shop 1 weld area that had a missing ground pin on its power cord.
Recent events (2)
- · I (S) $3000
- · Z (S) $5000
More inspections at Ram-Fab, INC.
View Ram-Fab, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332996)
More inspections in AR
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339427098.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.