Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: GLOBAL POWERTRAIN SYSTEMS, LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of GLOBAL POWERTRAIN SYSTEMS, LLC in 32 DART ROAD, NEWNAN, GA 30265 (NAICS 561499). OSHA activity number 339428781.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Global Powertrain Systems, LLC — free Get an email when a new federal OSHA severe-injury report for Global Powertrain Systems, LLC is published. One employer, no account, unsubscribe in one click.
Site address
32 DART ROAD
City
NEWNAN
State
GA
ZIP
30265
Mailing
32 DART ROAD, NEWNAN, GA 30265
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
561499
Employees
91
Ownership type
A

5 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 1 instance 1 exposed
Issued
Dec 23, 2013
Penalty
Initial $2,800 · Current $1,680 Reduced
OSH ACT of 1970 Section (5)(a)(1):  The employer did not furnish employment and a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to contact hazard.  a) 32 Dart Road, Newnan, Ga., Warehouse Floor: The employer failed to ensure that an adequate eyewash station was maintained for employees that handled injurious materials such as, but not limited to, Zep Split Recirculator containing phosphoric acid.  Employees were exposed to a contact hazard while performing operator assigned duties of transmission re-fabrication.
Recent events (2)
  • — I (S) $1680
  • — Z (S) $2800

1910.147 C01

Serious Gravity 5 1 instance 2 exposed
Issued
Dec 23, 2013
Abate by
Jan 13, 2014
Penalty
Initial $4,200 · Current $2,520 Reduced
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:  a) 32 Dart Road, Newnan, GA; - Production Area - The employer did not implement a lockout/tagout program to protect employees performing maintenance on equipment such as, but not limited to CNC Lathe machines, compressors, and powered industrial trucks in the production area.
Recent events (2)
  • — I (S) $2520
  • — Z (S) $4200

1910.303 B02

Other-than-serious 1 instance 5 exposed
Issued
Dec 23, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:  a) 32 Dart Road, Newnan, Ga; Production Area: Employees were using junction boxes, designed for temporary installation, as permanent power supply, exposing employee to shock hazard.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 E01

Other-than-serious 1 instance 2 exposed
Issued
Dec 23, 2013
Abate by
Jan 13, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program which at included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii):   a) 32 Dart Road, Newnan, Ga., The employer did not develop, implement, and maintain at the work place a written hazard communication program which would inform and educate employees working with potential hazardous products such as Lacquer Thinner, AIC Advanced Industrial Coatings, Dexron III Mercon Automatic Transmission fluid and Mineral Spirits.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 3 exposed
Issued
Dec 23, 2013
Abate by
Jan 13, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  a) 32 Dart road, Newnan, Ga., Warehouse Floor: The employer allowed employees to use chemicals in the remanufacturing of transmissions while failing to provide information or training to those employees regarding the potential hazards of handling Zep Split Recirculator, Advanced Industrial Coatings Acrylic Enamel, Lacquer Thinner and other chemicals that they were exposure to daily.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Global Powertrain Systems, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339428781.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.