BRADFORD, IL · 2013-10-07 00:00:00

OSHA Inspection: GREEN GABLES INC.

Complaint inspection · Safety discipline

At a glance

On 2013-10-07 00:00:00, OSHA opened a complaint safety inspection of GREEN GABLES INC. in 201 A BONITA AVE, BRADFORD, IL 61421 (NAICS 337122). OSHA activity number 339430472.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Green Gables INC. for free Get an email when a new federal OSHA severe-injury report for Green Gables INC. is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment: GREEN GABLES INC.
Site address: 201 A BONITA AVE
City: BRADFORD
State: IL
ZIP: 61421
Mailing: 164 W MAIN STREET, BRADFORD, IL 61421

What kind of inspection was it?

Inspection type: Complaint (B)
Scope: Partial (B)
Discipline: Safety
Advance notice: No
Union status: B

When did the case open and close?

Opened: 2013-10-07 00:00:00
Closing conference: 2013-10-07 00:00:00
Case closed: 2014-11-05 00:00:00
Last modified: 2026-08-01 00:00:00
Data loaded: 2026-08-02 00:19:54

Establishment context

NAICS code: 337122
Employees: 65
Ownership type: A

Citations

4 citations on file for this inspection.

1910.213 C01

Serious Gravity 10 10 instances 15 exposed

Issued: Oct 16, 2013
Abate by: Dec 2, 2013
Penalty: Initial $4,900 · Current $3,430 Reduced

General-duty citation text

29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:    Employees were exposed to amputations when using ten unguarded table saws that did not have automatically adjusting hoods affixed to the saws.        a.    Powermatic table saw, Model No: 66-TA-SAW; Serial No: 04080661906;        b.    Powermatic table saw, Model No: 2000; Serial No: 110720000927;        c.    Powermatic table saw, Model No: 2000;        d.    Powermatic table saw, Model No: 66-TA SAW; Serial No: 08010660018;        e.    Powermatic table saw, Model No: 2000; Serial No: 110720000824;        f.    Powermatic table saw, Model No: 2000; Serial No: 1000XXXXXXX;        g.    Powermatic table saw, Model No: 2000; Serial No: 110720000815;        h.    Powermatic table saw, Model No: 2000; Serial No: 110720000846;        i.    Powermatic table saw, Model No: 2000; Serial No: 111220000899;        j.    Powermatic table saw, Model No: 2000; Serial No: 111220000904;

Recent events (2)

2013-11-08 00:00:00 · I (S) $3430
2013-10-16 00:00:00 · Z (S) $4900

1910.213 C02

Serious Gravity 10 10 instances 15 exposed

Issued: Oct 16, 2013
Abate by: Nov 12, 2013
Penalty: Initial $0 · Current $0

General-duty citation text

29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator:  Employees were exposed to amputations when using ten unguarded table saws that did not have spreaders affixed to the saws.      a.    Powermatic table saw, Model No: 66-TA-SAW; Serial No: 04080661906;      b.    Powermatic table saw, Model No: 2000; Serial No: 110720000927;      c.    Powermatic table saw, Model No: 2000;      d.    Powermatic table saw, Model No: 66-TA SAW; Serial No: 08010660018;      e.    Powermatic table saw, Model No: 2000; Serial No: 110720000824;      f.    Powermatic table saw, Model No: 2000; Serial No: 1000XXXXXXX;      g.    Powermatic table saw, Model No: 2000; Serial No: 110720000815;      h.    Powermatic table saw, Model No: 2000; Serial No: 110720000846;      i.    Powermatic table saw, Model No: 2000; Serial No: 111220000899;      j.    Powermatic table saw, Model No: 2000; Serial No: 111220000904;

Recent events (2)

2013-11-08 00:00:00 · I (S) $0
2013-10-16 00:00:00 · Z (S) $0

1910.213 C03

Serious Gravity 10 10 instances 15 exposed

Issued: Oct 16, 2013
Abate by: Nov 12, 2013
Penalty: Initial $0 · Current $0

General-duty citation text

29 CFR 1910.213(c)(3): Handfed ripsaw(s) were not provided with non kickback fingers or dogs designed to provide adequate holding power for all thicknesses of materials being cut:  Employees were exposed to amputations when using ten unguarded table saws that did not have non kickback fingers or dogs affixed to the saws.      a.    Powermatic table saw, Model No: 66-TA-SAW; Serial No: 04080661906;      b.    Powermatic table saw, Model No: 2000; Serial No: 110720000927;      c.    Powermatic table saw, Model No: 2000;      d.    Powermatic table saw, Model No: 66-TA SAW; Serial No: 08010660018;      e.    Powermatic table saw, Model No: 2000; Serial No: 110720000824;      f.    Powermatic table saw, Model No: 2000; Serial No: 1000XXXXXXX;      g.    Powermatic table saw, Model No: 2000; Serial No: 110720000815;      h.    Powermatic table saw, Model No: 2000; Serial No: 110720000846;      i.    Powermatic table saw, Model No: 2000; Serial No: 111220000899;      j.    Powermatic table saw, Model No: 2000; Serial No: 111220000904;

Recent events (2)

2013-11-08 00:00:00 · I (S) $0
2013-10-16 00:00:00 · Z (S) $0

1910.213 D01

Serious Gravity 10 10 instances 15 exposed

Issued: Oct 16, 2013
Abate by: Nov 12, 2013
Penalty: Initial $0 · Current $0

General-duty citation text

29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:  Employees were exposed to amputations when using ten unguarded table saws that did not have automatically adjusting hoods affixed to the saws.      a.    Powermatic table saw, Model No: 66-TA-SAW; Serial No: 04080661906;      b.    Powermatic table saw, Model No: 2000; Serial No: 110720000927;      c.    Powermatic table saw, Model No: 2000;      d.    Powermatic table saw, Model No: 66-TA SAW; Serial No: 08010660018;      e.    Powermatic table saw, Model No: 2000; Serial No: 110720000824;      f.    Powermatic table saw, Model No: 2000; Serial No: 1000XXXXXXX;      g.    Powermatic table saw, Model No: 2000; Serial No: 110720000815;      h.    Powermatic table saw, Model No: 2000; Serial No: 110720000846;      i.    Powermatic table saw, Model No: 2000; Serial No: 111220000899;      j.    Powermatic table saw, Model No: 2000; Serial No: 111220000904;

Recent events (2)

2013-11-08 00:00:00 · I (S) $0
2013-10-16 00:00:00 · Z (S) $0

More inspections in this industry (NAICS 337122)

Jul 23, 2026 111663 - Riedel Rustic - LOG Furniture LLC · PARK RAPIDS, MN Jul 15, 2026 161554 - SE Board, INC · HIGH POINT, NC Jul 14, 2026 317744782 - John Kashuba · PORTLAND, OR Jul 13, 2026 69322 - Kimball Furniture Group LLC · FORDSVILLE, KY Jun 30, 2026 161459 - This END UP Furniture Company · SANFORD, NC

More inspections in IL

Aug 4, 2026 MK Construction Group INC. · HIGHLAND PARK, IL Aug 4, 2026 Roofcap LLC · MAYWOOD, IL Aug 4, 2026 RK Quality Remodeling INC. · ARLINGTON HEIGHTS, IL Aug 4, 2026 Agri-Fab INC. · SULLIVAN, IL Aug 4, 2026 RB Construction IL INC · GLASFORD, IL

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339430472.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.