Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: RBS FAB, INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of RBS FAB, INC. in 230 N. HOERNERSTOWN RD., HUMMELSTOWN, PA 17036 (NAICS 333514). OSHA activity number 339437444.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch RBS FAB, INC. — free Get an email when a new federal OSHA severe-injury report for RBS FAB, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
RBS FAB, INC.
Site address
230 N. HOERNERSTOWN RD.
City
HUMMELSTOWN
State
PA
ZIP
17036
Mailing
230 N. HOERNERSTOWN RD., HUMMELSTOWN, PA 17036
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333514
Employees
8
Ownership type
A

3 citations on file for this inspection.

1910.1025 L01 I

Serious Gravity 1 1 instance 1 exposed
Issued
Nov 15, 2013
Abate by
Dec 12, 2013
Penalty
Initial $1,200 · Current $900 Reduced

Hazardous substances 1591

29 CFR 1910.1025(l)(1)(i): The employer who has a workplace in which there was a potential exposure to airborne lead at any level did not inform employees of the content of Appendices A and B of this regulation:  (a) RBS Fab, Inc. - The employer did not inform employee(s) who were assisting in the melting and pouring of lead ingots of the content of Appendix A and B of the standard, on or about October 24, 2013.    Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $900
  • — Z (S) $1200

1910.1025 M01 III

Serious Gravity 1 1 instance 1 exposed
Issued
Nov 15, 2013
Abate by
Dec 12, 2013
Penalty
Initial $0 · Current $0

Hazardous substances 1591

29 CFR 1910.1025(m)(1)(iii): The employer did not include lead in the hazard communication program established to comply with the HCS (1910.1200). The employer did not ensure that each employee had access to labels on containers of lead and to material safety data sheets, and is trained in accordance with the requirements of HCS and paragraph (l) of this section:   (a) RBS Fab, Inc. - The employer did not include information on lead in the written hazard communications program.  Employee(s) melted lead ingots in a crucible and poured the contents in a lead lined shield box, on or about October 24, 2013.      Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 G08

Serious Gravity 1 1 instance 1 exposed
Issued
Nov 15, 2013
Abate by
Dec 12, 2013
Penalty
Initial $0 · Current $0

Hazardous substances 1591

29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required material safety data sheets for each hazardous chemical, and did not ensure that they are readily accessible during each work shift to employees when they are in their work area(s):  (a) RBS FAB, Inc - The employer did not maintain copies of material safety data sheet for chemicals used during the melting and pouring process such as but not limited to Lead, on or about October 24, 2013.    Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View RBS FAB, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339437444.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.