EAU CLAIRE, WI ·
OSHA Inspection: SPECIAL T SIDING AND CONSTRUCTION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SPECIAL T SIDING AND CONSTRUCTION in CORNER OF STATE ST. AND GILBERT ST., EAU CLAIRE, WI 54702 (NAICS 238170). OSHA activity number 339441404.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SPECIAL T SIDING AND CONSTRUCTION
- Site address
- CORNER OF STATE ST. AND GILBERT ST.
- City
- EAU CLAIRE
- State
- WI
- ZIP
- 54702
- Mailing
- 8700 SCHUMACHER RD, FALL CREEK, WI 54742
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238170
- Employees
- 3
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.100 A
- Issued
- Nov 8, 2013
- Abate by
- Dec 10, 2013
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: a) At the residential construction project; The employee did not have head protection while working from the ground during hoisting of materials to the workers above.
Recent events (2)
- · I (S) $960
- · Z (S) $1600
1926.404 B01 I
- Issued
- Nov 8, 2013
- Abate by
- Dec 10, 2013
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1926.404(b)(1)(i): Employer did not use either ground fault circuit interrupters as specified in paragraph (b)(1)(ii) of this section, or an assured equipment grounding conductor program as specified in paragraph (b)(1)(iii) of this section to protect employees on construction sites. a) At the residential construction project; The electrical cord that was used to power the table saw and chop saw did not have ground fault circuit interrupters and was not part of an assured grounding conductor program.
Recent events (2)
- · I (S) $960
- · Z (S) $1600
1926.405 G02 IV
- Issued
- Nov 8, 2013
- Abate by
- Dec 10, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: a) At the residential construction project; The extension cord that was used to power the table saw and chop saw had a damaged strain relief at the plug exposing the wires inside of the outer sheathing.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.416 E01
- Issued
- Nov 8, 2013
- Abate by
- Dec 10, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used: a) At the residential construction project; The extension cord that was used to power the table saw and chop saw had a damaged outer sheath.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections at Special T Siding and Construction
View Special T Siding and Construction's full OSHA safety record →
More inspections in this industry (NAICS 238170)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339441404.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.