BUFFALO, NY ·
OSHA Inspection: AVANTI ADVANCED MANUFACTURING CORPORATION
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of AVANTI ADVANCED MANUFACTURING CORPORATION in 201 DUTTON AVENUE, BUFFALO, NY 14211 (NAICS 333220). OSHA activity number 339444721.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AVANTI ADVANCED MANUFACTURING CORPORATION
- Site address
- 201 DUTTON AVENUE
- City
- BUFFALO
- State
- NY
- ZIP
- 14211
- Mailing
- 201 DUTTON AVENUE, BUFFALO, NY 14211
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333220
- Employees
- 3
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
1910.22 A01
- Issued
- Nov 20, 2013
- Abate by
- Dec 21, 2013
- Penalty
- Initial $1,020 · Current $765 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition. a) On or about 10/28/13, in the machine shop areas, Wood and Aluminum dusts accumulations on machines' surfaces such as, but not limited to: radial saw, table saw, electrical junction box and on floors were greater than 1/32 inch and required cleaning. b) On or about 10/28/13, in the machine shop areas, a 600 volt cord from a Dri-Air Machine was on an aisle floor creating a tripping hazard. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (S) $765
- · Z (S) $1020
1910.147 C01
- Issued
- Nov 20, 2013
- Abate by
- Dec 21, 2013
- Penalty
- Initial $1,700 · Current $1,275 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: a) On or about 10/28/13, in the establishment, employees performed servicing/maintenance of machines, such as, but not limited to: changing dies on a Multi-Press Shear Press, Model No WZAP-3, Serial #30907 and a Nissei Injection Molding Machine, without the use of an energy control program (Lockout/Tagout(LOTO) Program), machine-specific LOTO procedures, hardware, training or periodic inspections. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (S) $1275
- · Z (S) $1700
1910.151 C
- Issued
- Nov 20, 2013
- Abate by
- Dec 21, 2013
- Penalty
- Initial $1,360 · Current $1,020 Reduced
General-duty citation text
29 CFR 1910.151(c): Where the eyes or body of any person may be exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body shall be provided within the work area for immediate emergency use: a) On or about 10/28/13, in the battery charging area, there was not an emergency eye wash immediately available for employees refilling water on forklift trucks' batteries. These batteries contained corrosive acid. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (S) $1020
- · Z (S) $1360
More inspections in this industry (NAICS 333220)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339444721.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.