VINELAND, NJ ·
OSHA Inspection: A & C STAFFING LLC
Unprogrammed Related inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Related safety inspection of A & C STAFFING LLC in 2320 INDUSTRIAL WAY, VINELAND, NJ 08360 (NAICS 561320). OSHA activity number 339453730.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- A & C STAFFING LLC
- Site address
- 2320 INDUSTRIAL WAY
- City
- VINELAND
- State
- NJ
- ZIP
- 08360
- Mailing
- 613 EAST ELMER STREET, VINELAND, NJ 08360
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 561320
- Employees
- 300
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1910.147 C07 I
- Issued
- Jan 14, 2014
- Abate by
- Feb 21, 2014
- Penalty
- Initial $7,000 · Current $4,900 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: (a) Facility, Industrial Way, Vineland NJ: Training had not been provided to employees performing actions including but not limited to scraping glue from the box making machine, unjamming sticky labels from the label machines, picking up produce on the floor along the conveyor lines, unjamming the conveyor line, occurred on or about 10/24/13. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- · I (S) $4900
- · Z (S) $7000
1910.212 A01
- Issued
- Jan 14, 2014
- Abate by
- Feb 21, 2014
- Penalty
- Initial $7,000 · Current $4,900 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Lucca Freezer and Cold Storage Facility, Industrial Way, Vineland NJ: Ingoing nip points located along the conveyor system were not provided with a guard, observed on or about 10/24/13. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- · I (S) $4900
- · Z (S) $7000
1910.219 C04 I
- Issued
- Jan 14, 2014
- Abate by
- Feb 21, 2014
- Penalty
- Initial $7,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) projected more than one half the diameter of the shaft: a) Lucca Freezer and Cold Storage Facility, New Repack (new Building) Industrial Way, Vineland NJ, B1 Line, Conveyor to Round table: Protruding shaft ends were not cut down to half the size of the diameter and were not provided with covers, the shaft protruded 3/4 of an inch, observed on or about 10/24/13. b) Lucca Freezer and Cold Storage Facility, New Repack (new Building) Industrial Way, Vineland NJ, B2 Conveyor to elevator: Protruding shaft ends were not cut down to half the size of the diameter and were not provided with covers, the shaft protruded 1 inch, observed on or about 10/24/13. c) Lucca Freezer and Cold Storage Facility, New Repack (new Building) Industrial Way, Vineland NJ, B4 Line, End of conveyor: Protruding shaft ends were not cut down to half the size of the diameter and were not provided with covers, the shaft protruded 1, observed on or about 10/24/13. d) Lucca Freezer and Cold Storage Facility, New Repack (new Building) Industrial Way, Vineland NJ, B12 Line, Conveyor to Round table: Protruding shaft ends were not cut down to half the size of the diameter and were not provided with covers, the shaft protruded 3/4 of an inch, observed on or about 10/24/13. e) Lucca Freezer and Cold Storage Facility, Old Repack (old Building) Industrial Way, Vineland NJ, B1 Box Cover 1: Protruding shaft ends were not cut down to half the size of the diameter and were not provided with covers, the shaft protruded 2 1/2 inches, observed on or about 10/24/13. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- · I (S) $0
- · Z (S) $7000
1910.1200 H01
- Issued
- Jan 14, 2014
- Abate by
- Feb 21, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) Lucca Freezer and Cold Storage Facility, Industrial Way, Vineland NJ: Training was not provided to employees who work around or adjacent to employees handling products including but not limited to Chlorinated Degreaser, E2 Hand Wash& Sanitizer, HDQ Neutral One -Step Disinfectant, NABC Concentrate, Austin 1 Bleach Commercial Disinfectant Sanitizer and Green Solutions Industrial Cleaner 105 occurred on or about 10/24/13. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM, FAILURE TO DO SO WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 AS PER 29 CFR 1903.19.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections in this industry (NAICS 561320)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339453730.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.