UNION, NJ · 2013-11-06 00:00:00

OSHA Inspection: ALBERTI WOODWORKING INC.

Complaint inspection · Safety discipline

At a glance

On 2013-11-06 00:00:00, OSHA opened a complaint safety inspection of ALBERTI WOODWORKING INC. in 711 LEHIGH AVE., UNION, NJ 07083 (NAICS 321918). OSHA activity number 339469975.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Alberti Woodworking INC. for free Get an email when a new federal OSHA severe-injury report for Alberti Woodworking INC. is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment: ALBERTI WOODWORKING INC.
Site address: 711 LEHIGH AVE.
City: UNION
State: NJ
ZIP: 07083
Mailing: 711 LEHIGH AVE., UNION, NJ 07083

What kind of inspection was it?

Inspection type: Complaint (B)
Scope: Partial (B)
Discipline: Safety
Advance notice: No
Union status: B

When did the case open and close?

Opened: 2013-11-06 00:00:00
Closing conference: 2013-11-06 00:00:00
Case closed: 2014-06-16 00:00:00
Last modified: 2026-08-13 00:00:00
Data loaded: 2026-08-14 00:19:56

Establishment context

NAICS code: 321918
Employees: 7
Ownership type: A

Citations

7 citations on file for this inspection.

1910.22 B01

Serious Gravity 1 1 instance 2 exposed

Issued: Nov 21, 2013
Penalty: Initial $1,020 · Current $25 Reduced

General-duty citation text

29 CFR 1910.22(b)(1):  Aisle(s) or passageway(s) were not kept clear:      a/ Alberti Woodworking/Union NJ Site: Spray Finishing Room. Spray gun hoses used during the spray finishing operation were located on the floor and were not arranged and secured in place to prevent employees from tripping when accessing the area.    Observed on/or about 11/06/2013

Recent events (3)

2014-04-14 00:00:00 · R (S) $25
2013-12-17 00:00:00 · C (S) $1020
2013-11-21 00:00:00 · Z (S) $1020

1910.37 A02

Serious Gravity 5 1 instance 4 exposed

Issued: Nov 21, 2013
Penalty: Initial $1,360 · Current $200 Reduced

General-duty citation text

29 CFR 1910.37(a)(2): Exit access(es) were not arranged so that it would not be necessary to travel toward any area of high hazard occupancy in order to reach the nearest exit, and the path of travel was not effectively shielded from the high hazard location by suitable partitions or other physical barriers:    a/ Alberti Woodworking/Union NJ Site:  East Side of Bldg. Propane Storage Area. Propane storage area consisting of approx. 6 tanks of Propane is located within 2 feet of the exit door.    Six standard size Propane tanks located in a metal cage not removed from the path of travel from the building.        Observed on/or about 11/06/2013

Recent events (3)

2014-04-14 00:00:00 · 2 (S) $200
2013-12-17 00:00:00 · C (S) $1360
2013-11-21 00:00:00 · Z (S) $1360

1910.213 C01

Serious Gravity 5 2 instances 2 exposed

Issued: Nov 21, 2013
Abate by: Dec 18, 2013
Penalty: Initial $1,700 · Current $250 Reduced

General-duty citation text

29 CFR 1910.213(c)(1): Circular hand-fed ripsaw was not guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut.     a/ Alberti Woodworking/Union NJ Site: Production/Cutting Area.  DeWalt and Rockwell Unisaw circular table saws with blades approx. 8 inches to 10 inches in diameter were not guarded to prevent accidental contact during inspection. Guards were not provided and designed to adjust to the thickness of the stock being cut and means to keep the stock in place during ripping operations.    Observed on/or about 11/06/2013

Recent events (3)

2014-04-14 00:00:00 · R (S) $250
2013-12-17 00:00:00 · C (S) $1700
2013-11-21 00:00:00 · Z (S) $1700

1910.213 D01

Serious Gravity 5 2 instances 2 exposed

Issued: Nov 21, 2013
Abate by: Dec 18, 2013
Penalty: Initial $0 · Current $0

General-duty citation text

29 CFR 1910.213(d)(1): Circular hand-fed crosscut table saw was not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut.  a/ Alberti Woodworking/Union NJ Site: Production/Cutting Area.  DeWalt and Rockwell Unisaw circular table saws with blades approx. 8 inches to 10 inches in diameter were not guarded to prevent accidental contact during inspection. Guards were not provided and designed to adjust to the thickness of the stock being cut and means to keep the stock in place during cross-cutting operations.  Observed on/or about 11/06/2013

Recent events (3)

2014-04-14 00:00:00 · R (S) $0
2013-12-17 00:00:00 · C (S) $0
2013-11-21 00:00:00 · Z (S) $0

1910.219 F03

Serious Gravity 1 1 instance 2 exposed

Issued: Nov 21, 2013
Penalty: Initial $1,020 · Current $25 Reduced

General-duty citation text

29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven feet or less above floors or platforms were not enclosed:    a/ Alberti Woodworking/Union NJ Site:  Production Hot Coating Area UV Hot Coating Machine.  Sprocket wheels approx. 4 inches  to 8 inches in diameter and chains approx. 1/2 inch to 1 inch wide were not guarded to prevent accident during operation.    Observed on/or about 11/06/2013

Recent events (3)

2014-04-14 00:00:00 · R (S) $25
2013-12-17 00:00:00 · C (S) $1020
2013-11-21 00:00:00 · Z (S) $1020

1910.24 C

Other-than-serious 1 instance 2 exposed

Issued: Nov 21, 2013
Penalty: Initial $0 · Current $0

General-duty citation text

29 CFR 1910.24(c):  Stairways shall be designed and constructed to carry a load of five times the normal live load anticipated but never of less strength than to carry safely a moving concentrated load of 1,000 pounds:   a/ Alberti Woodworking/Union NJ Site: Warehouse:  Wooden stairs (5 risers including landing) leading from the lower Warehouse to the upper Warehouse. The bottom step was damaged.      Observed on/or about 11/06/2013

Recent events (3)

2014-04-14 00:00:00 · R (O) $0
2013-12-17 00:00:00 · C (O) $0
2013-11-21 00:00:00 · Z (O) $0

1910.107 B09

Other-than-serious 1 instance 2 exposed

Issued: Nov 21, 2013
Penalty: Initial $0 · Current $0

General-duty citation text

29 CFR 1910.107(b)(9):  A clear space of not less than 3 feet on all sides was not kept free from storage or combustible construction:  a/ Alberti Woodworking/Union NJ Site: Spray Finishing Room.  Spray booth was not maintained free of storage material (wood frames/panels/metal storage rack) on all sides of the spray booth and boxes of Paint Pockets located on the top.      Observed on/or about 11/06/2013

Recent events (3)

2014-04-14 00:00:00 · R (O) $0
2013-12-17 00:00:00 · C (O) $0
2013-11-21 00:00:00 · Z (O) $0

More inspections at Alberti Woodworking INC.

Feb 19, 2014 UNION, NJ Jan 13, 2014 UNION, NJ Feb 4, 2004 UNION, NJ

View Alberti Woodworking INC.'s full OSHA safety record →

More inspections in this industry (NAICS 321918)

Aug 6, 2026 Sudberry Millwork · NASHVILLE, TN Aug 6, 2026 Sudberry Millwork · NASHVILLE, TN Jul 30, 2026 Appalachian Wood Products, INC. · CLEARFIELD, PA Jul 27, 2026 Connor Sports Flooring LLC · AMASA, MI Jul 23, 2026 317744872 - Dayspring Hardwood & Moulding INC · PRINEVILLE, OR

More inspections in NJ

Aug 11, 2026 Monro INC. · GLASSBORO, NJ Aug 11, 2026 Northeastern Interior Services · DUNELLEN, NJ Aug 11, 2026 Kozyard LLC · PISCATAWAY, NJ Aug 10, 2026 B&S Home Renovation, LLC · ISELIN, NJ Aug 9, 2026 Henkels & Mccoy, INC. · SOUTH ORANGE, NJ

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339469975.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.