KANSAS CITY, MO —
OSHA Inspection: COSENTINO'S PRICE CHOPPER
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of COSENTINO'S PRICE CHOPPER in 1030 W. 103RD ST., KANSAS CITY, MO 64114 (NAICS 445110). OSHA activity number 339474678.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COSENTINO'S PRICE CHOPPER
- Site address
- 1030 W. 103RD ST.
- City
- KANSAS CITY
- State
- MO
- ZIP
- 64114
- Mailing
- 3901 W. 83RD ST., PRAIRIE VILLAGE, KS 66208
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 445110
- Employees
- 165
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Dec 13, 2013
- Abate by
- Jan 17, 2014
- Penalty
- Initial $3,400 · Current $2,380 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Bakery: Employees were exposed to the large Hobart Mixer which was not guarded to protect employees from rotating beaters. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- — I (S) $2380
- — Z (S) $3400
1910.305 B02
- Issued
- Dec 13, 2013
- Abate by
- Jan 17, 2014
- Penalty
- Initial $3,400 · Current $2,380 Reduced
General-duty citation text
29 CFR 1910.305(b)(2): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy: (a) Back Floral Cooler: Employees were exposed to electrical hazards as the junction box near the floor of the Back Floral Cooler did not have a cover. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- — I (S) $2380
- — Z (S) $3400
1910.305 F01
- Issued
- Dec 13, 2013
- Abate by
- Jan 17, 2014
- Penalty
- Initial $3,400 · Current $2,380 Reduced
General-duty citation text
29 CFR 1910.305(f)(1): All conductors used for general wiring were not insulated unless otherwise permitted in this subpart. (a) Produce Preparation: Employees were exposed to the electrical cord for the shrink wrapper that did not have adequate insulation as the electrical cord was damaged. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- — I (S) $2380
- — Z (S) $3400
1910.305 G02 III
- Issued
- Dec 13, 2013
- Abate by
- Jan 17, 2014
- Penalty
- Initial $3,400 · Current $2,380 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: (a) Dock Doors: Employees were exposed to electrical hazards as the Phoenix Dock Lite did not have adequate strain relief to the back of the light and to the metal arm of the light. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- — I (S) $2380
- — Z (S) $3400
More inspections at Cosentino'S Price Chopper
View Cosentino'S Price Chopper's full OSHA safety record →
More inspections in this industry (NAICS 445110)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339474678.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.