FAIRLESS HILLS, PA —
OSHA Inspection: ABINGTON RELDAN METALS, LLC
Follow-up inspection · Health discipline
At a glance
On , OSHA opened a follow-up health inspection of ABINGTON RELDAN METALS, LLC in 550 OLD BORDENTOWN ROAD, FAIRLESS HILLS, PA 19030 (NAICS 331419). OSHA activity number 339480196.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ABINGTON RELDAN METALS, LLC
- Site address
- 550 OLD BORDENTOWN ROAD
- City
- FAIRLESS HILLS
- State
- PA
- ZIP
- 19030
- Mailing
- 550 OLD BORDENTOWN ROAD, FAIRLESS HILLS, PA 19030
What kind of inspection was it?
- Inspection type
- Follow-up (F)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331419
- Employees
- 100
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.134 E01
- Issued
- Feb 7, 2014
- Penalty
- Initial $1,951 · Current $1,463 Reduced
1591
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: a) Laboratory: Chemists required to wear 3M N100 respirators while working with leaded flux were not provided medical evaluations prior to being required to wear the respirators, on or about November 8, 2013. No abatement certification or documentation required Note: The employer may discontinue an employee's medical evaluations when the employee is no longer required to use a respirator.
Recent events (2)
- — I (S) $1463.25
- — Z (S) $1951
1910.134 F02
- Issued
- Feb 7, 2014
- Penalty
- Initial $0 · Current $0
1591
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator: a) Laboratory: Chemists required to wear 3M N100 respirators while working with leaded flux were not provided fit tests, on or about November 8, 2013. No abatement certification or documentation required.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1018 N02
- Issued
- Feb 7, 2014
- Penalty
- Initial $3,060 · Current $2,295 Reduced
0260
General-duty citation text
29 CFR 1910.1018(n)(2): Affected employee(s) were not provided an opportunity for a medical examination at the time of initial assignment to an area where they are likely to be exposed to inorganic arsenic over the action level at least 30 days per year: a) Ball Mill Room: A Ball Mill Operator who worked in an area where over-exposures to arsenic were documented was not provided a medical evaluation including all the elements of the standard prior to being exposed to arsenic, on or about December 9, 2013. No abatement certification or documentation required.
Recent events (2)
- — I (S) $2295
- — Z (S) $3060
1910.1018 N02 II A
- Issued
- Feb 7, 2014
- Penalty
- Initial $0 · Current $0
0260
General-duty citation text
29 CFR 1910.1018(n)(2)(ii)(A): For employees exposed above the action level for at least 30 days per year the medical exam did not include a standard posterior-anterior chest x-ray: a) Ball Mill Room: Ball Mill Operators working in an area where over-exposures to arsenic were documented were not provided a chest X-ray during the initial medical examination, on or about December 9, 2013. No abatement certification or documentation required.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1018 J01
- Issued
- Feb 7, 2014
- Penalty
- Initial $0 · Current $0
0260
General-duty citation text
29 CFR 1910.1018(j)(1): Appropriate protective work clothing and equipment were not used by all workers working in regulated areas, or where the possibility of skin or eye irritation existed from exposure to inorganic arsenic: a) Ball Mill Room: Employees entering the Ball Mill Room for short durations were not required to wear protective work clothing, on or about December 9, 2013. No abatement certification or documentation required.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Abington Reldan Metals, LLC
View Abington Reldan Metals, LLC's full OSHA safety record →
More inspections in this industry (NAICS 331419)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339480196.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.