Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,194,531Inspections Most recent open 2026-08-11 Last loaded 2026-08-14

OSHA Inspection: COATERS INCORPORATED

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of COATERS INCORPORATED in 305 NASH STREET, NEW BEDFORD, MA 02746 (NAICS 313320). OSHA activity number 339480584.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Coaters Incorporated for free Get an email when a new federal OSHA severe-injury report for Coaters Incorporated is published. One employer, no account, unsubscribe in one click.
Site address
305 NASH STREET
City
NEW BEDFORD
State
MA
ZIP
02746
Mailing
305 NASH STREET, NEW BEDFORD, MA 02746
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
313320
Employees
7
Ownership type
Private (A)

6 citations on file for this inspection.

1910.22 A02

Serious Gravity 1 20 instances 6 exposed
Issued
Nov 19, 2013
Abate by
Apr 8, 2014
Penalty
Initial $1,200 · Current $600 Reduced
29 CFR 1910.22(a)(2): Floor(s) of workroom(s) were not maintained in a clean and, so far as possible, a dry condition:    Worksite:                The roof leaks in numerous locations when it rains creating slippery conditions and damaging the floor. Some leaks are near electrical equipment.
Recent events (2)
  • · I (S) $600
  • · Z (S) $1200

1910.147 C04 I

Other-than-serious 1 instance 6 exposed
Issued
Nov 19, 2013
Abate by
Jan 30, 2014
Penalty
Initial $2,000 · Current $0 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:    Worksite:              The employer did not develop lockout tagout procedures for each type of machine. They have coating lines, inspections machines and mixing machines.
Recent events (2)
  • · I (O) $0
  • · Z (S) $2000

1910.176 A

Serious Gravity 5 20 instances 6 exposed
Issued
Nov 19, 2013
Abate by
Apr 8, 2014
Penalty
Initial $1,600 · Current $800 Reduced
29 CFR 1910.176(a): Aisle(s) or passageway(s) were not kept in good repair:    Worksite:              Numerous sections of the floors of aisles were damaged.
Recent events (2)
  • · I (S) $800
  • · Z (S) $1600

1910.178 L06

Serious Gravity 5 1 instance 6 exposed
Issued
Nov 19, 2013
Abate by
Jan 10, 2014
Penalty
Initial $1,600 · Current $800 Reduced
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):    Worksite:              The employer did not have a written record of when operators of powered industrial trucks were trained.
Recent events (2)
  • · I (S) $800
  • · Z (S) $1600

1910.212 A02

Serious Gravity 5 1 instance 4 exposed
Issued
Nov 19, 2013
Abate by
Jan 10, 2014
Penalty
Initial $1,600 · Current $800 Reduced
29 CFR 1910.212(a)(2): Guard(s) on machine(s) were not affixed to the machine or secured elsewhere when attachment to the machine was not possible:    Coating Line 6:               The guard for the belt drive for the cooling cans was not lagged to the machine or to the floor.    Inspection Area:                 A guard for the drive of the inspection machine was not secured to the machine.
Recent events (2)
  • · I (S) $800
  • · Z (S) $1600

1910.219 F03

Serious Gravity 5 2 instances 6 exposed
Issued
Nov 19, 2013
Abate by
Jan 10, 2014
Penalty
Initial $2,000 · Current $1,000 Reduced
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed:      Coating Line 3:           A chain and sprocket wheel drive near the takeup section of coating line #3 was not enclosed by a guard.     Inspection Area:            A chain and sprocket wheel drive of the inspection machine was not enclosed by a guard.
Recent events (2)
  • · I (S) $1000
  • · Z (S) $2000

View Coaters Incorporated's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339480584.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.