BUHL, ID ·
OSHA Inspection: GASOLINE ALLEY
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of GASOLINE ALLEY in 1000 N. BROADWAY, BUHL, ID 83316 (NAICS 811112). OSHA activity number 339489999.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GASOLINE ALLEY
- Site address
- 1000 N. BROADWAY
- City
- BUHL
- State
- ID
- ZIP
- 83316
- Mailing
- 1000 N. BROADWAY, BUHL, ID 83316
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811112
- Employees
- 1
- Ownership type
- Private (A)
Citations
6 citations on file for this inspection.
1910.22 A01
- Issued
- Dec 3, 2013
- Abate by
- Dec 30, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition. (a) Muffler repair area, on or about November 18, 2013, and at times prior thereto, where piles of boxes, paper, equipment, parts, and more created a fire hazard with welding and cutting being done in the area. Note: Abatement certification is required for this item.
Recent events (1)
- · Z (S) $0
1910.252 A01 I
- Issued
- Dec 3, 2013
- Abate by
- Dec 30, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.252(a)(1)(i): When the object to be welded or cut could not be readily moved, all movable fire hazards in the vicinity were not taken to a safe place: (a) Muffler repair area, on or about November 18, 2013, and at times prior thereto, where piles of boxes, paper, equipment, parts, and more created a fire hazard with welding and cutting being done in the area. Note: Abatement certification is required for this item.
Recent events (1)
- · Z (S) $0
1910.176 B
- Issued
- Dec 3, 2013
- Abate by
- Dec 30, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.176(b): Storage of material created a hazard: (a) Tailpipe storage in the middle of the shop, on or about November 18, 2013, and at times prior thereto, where tailpipes were stored unsafely and not placed in existing wall racks designed to hold them. Note: Abatement certification is required for this item.
Recent events (1)
- · Z (S) $0
1910.215 A04
- Issued
- Dec 3, 2013
- Abate by
- Dec 30, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work and work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: (a) Near the entrance to the shop,on or about November 18, 2013, and at times prior thereto, Wisdom electric bench grinder, 3450 rpm, Serial number 06191; there was a groove in the right side of the stone where grinding was done while not using the work rest. (b) Near the entrance to the shop,on or about November 18, 2013, and at times prior thereto, Wisdom electric bench grinder, 3450 rpm, Serial number 06191, where the workrest was approximately 3/4 of an inch from the stone. Note: Abatement certification is required for this item.
Recent events (1)
- · Z (S) $0
1910.215 B09
- Issued
- Dec 3, 2013
- Abate by
- Dec 30, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (a) Near the entrance to the shop, on or about November 18, 2013, and at times prior thereto, Wisdom electric bench grinder, 3450 rpm, Serial number 06191. Note: Abatement certification is required for this item.
Recent events (1)
- · Z (S) $0
1910.305 B01 I
- Issued
- Dec 3, 2013
- Abate by
- Dec 30, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(i): Openings through which conductors entered cutout boxes, cabinets, or fittings were not effectively closed: (a) Near the entrance to the shop, on or about November 18, 2013, and at times prior thereto, electrical outlet box had a knockout opening to live electrical conductors. (b) Near the center of the shop, on or about November 18, 2013, and at times prior thereto, electrical outlet box on the building column had a cover with an open edge to live electrical conductors. Note: Abatement certification is required for this item.
Recent events (1)
- · Z (S) $0
More inspections at Gasoline Alley
View Gasoline Alley's full OSHA safety record →
More inspections in this industry (NAICS 811112)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339489999.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.