Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,196,249Inspections Most recent open 2026-08-20 Last loaded 2026-08-24

OSHA Inspection: BABSONS, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of BABSONS, INC. in 1015 CENTRE TURNPIKE, ORWIGSBURG, PA 17961 (NAICS 238160). OSHA activity number 339490310.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Babsons, INC. for free Get an email when a new federal OSHA severe-injury report for Babsons, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
BABSONS, INC.
Site address
1015 CENTRE TURNPIKE
City
ORWIGSBURG
State
PA
ZIP
17961
Mailing
POST OFFICE BOX 107, ORWIGSBURG, PA 17961
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
3
Ownership type
Private (A)

5 citations on file for this inspection.

1926.95 A

Serious Gravity 1 1 instance 2 exposed
Issued
Dec 13, 2013
Abate by
Dec 26, 2013
Penalty
Initial $1,200 · Current $450 Reduced
29 CFR 1926.95(a): Personal protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, was not provided, used, or maintained in a sanitary and reliable condition it was necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation, or physical contact.     a) 1015 Centre Turnpike, Orwigsburg PA; Employees were operating a Stanley Bostitch Model Number RN46-1 nail gun to install roofing shingles without the use of safety glasses, on or about 11/19/2013.     Abatement Certification Required
Recent events (2)
  • · I (S) $450
  • · Z (S) $1200

1926.100 A

Serious Gravity 1 1 instance 3 exposed
Issued
Dec 13, 2013
Abate by
Dec 26, 2013
Penalty
Initial $1,200 · Current $450 Reduced
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets.     a) 1015 Centre Turnpike, Orwigsburg PA; Employees were installing roofing shingles without the use of hard hats while employees were using nail guns above lower working employees, on or about 11/19/2013.    Abatement Certification Required
Recent events (2)
  • · I (S) $450
  • · Z (S) $1200

1926.501 B11

Serious Gravity 5 1 instance 3 exposed
Issued
Dec 13, 2013
Abate by
Dec 26, 2013
Penalty
Initial $1,600 · Current $1,600
29 CFR 1926.501(b)(11): Each employee on a steep roof with unprotected sides and edges 6 feet (1.8 m) or more above lower levels was not protected from falling by guardrail systems with toeboards, safety net systems, or personal fall arrest systems.   a) 1015 Centre Turnpike, Orwigsburg PA; Employees were installing roofing shingles between 13 feet 2 inches and 28 feet 11 inches above the ground on an 8/12 pitch roof without the use of fall protection, on or about 11/19/2013.  Abatement Certification Required
Recent events (2)
  • · I (S) $1600
  • · Z (S) $1600

1926.451 C02

Other-than-serious 1 instance 3 exposed
Issued
Dec 13, 2013
Abate by
Dec 26, 2013
Penalty
Initial $0 · Current $0
29 CFR 1926.451(c)(2): Supported scaffold poles, legs, posts, frames,  or uprights did not bear on base plates, mud sills or other adequate firm foundation.   a) 1015 Centre Turnpike, Orwigsburg PA; Employees were working on Biljax steel tubular scaffolding 12 feet 5 inches above the ground without the use of mud sills, on or about 11/19/2013.   Abatement Certification Required
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

1926.454 B

Other-than-serious 1 instance 3 exposed
Issued
Dec 13, 2013
Abate by
Dec 26, 2013
Penalty
Initial $0 · Current $0
29 CFR 1926.454(b): The employer did not have each employee involved in erecting, disassembling, moving, operating, repairing, maintaining, or inspecting a scaffold trained by a competent person to recognize any hazards associated with the work in question.   a) 1015 Centre Turnpike, Orwigsburg PA; The employer did not ensure the employees that had erected a Biljax steel tubular scaffold were trained by a competent person to recognize any hazards, on or about 11/19/2013.  Abatement Certification Required
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339490310.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.