MORTON, TX ·
OSHA Inspection: ROGER'S TIRE AND SUPPLY
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ROGER'S TIRE AND SUPPLY in 601 N. MAIN STREET, MORTON, TX 79346 (NAICS 441320). OSHA activity number 339491094.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ROGER'S TIRE AND SUPPLY
- Site address
- 601 N. MAIN STREET
- City
- MORTON
- State
- TX
- ZIP
- 79346
- Mailing
- 601 N. MAIN STREET, MORTON, TX 79346
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 441320
- Employees
- 4
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.177 C01
- Issued
- Apr 3, 2014
- Abate by
- May 16, 2014
- Penalty
- Initial $2,000 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.177(c)(1): The employer did not provide a program to train all employees who service rim wheels in the hazards involved and the safety procedures to follow while servicing rim wheels: On or about November 14, 2013, employees were exposed to struck-by hazards in that the employer had not established and implemented a program to train employees in servicing multi-piece tire rims.
Recent events (2)
- · I (S) $1400
- · Z (S) $2000
1910.177 C01 I
- Issued
- Apr 3, 2014
- Abate by
- May 16, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.177(c)(1)(i): The employer did not assure that no employee services any multi-piece rim wheel unless the employee has been trained and instructed in the correct and safe operating procedures described in 29 CFR 1910.177(f) of this section: On or about November 14, 2013, employees were exposed to struck-by hazards in that the employer did not ensure that employees were trained and instructed to service such as inflating multi-piece rim tires.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.177 F
- Issued
- Apr 3, 2014
- Abate by
- May 16, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.177(f): The employer did not establish a safe operating procedure for servicing multi-piece rim wheels which contained, at a minimum, the elements listed in 29 CFR 1910.177(f)(1) through (11): On or about November 14, 2013, employees were exposed to struck-by hazards in that the employer did not establish and implement a safe operating procedure for employees who inflated multi-piece rim tires.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.177 D01
- Issued
- Apr 3, 2014
- Abate by
- May 16, 2014
- Penalty
- Initial $2,000 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.177(d)(1): The employer did not furnish a restraining device for employees to use while inflating tires on multi-piece wheels: On or about November 14, 2013, employees were exposed to struck-by hazards in that the employer did not ensure that a restraining device was in place when employees inflated multi-piece rim tires.
Recent events (2)
- · I (S) $1400
- · Z (S) $2000
1910.177 D05
- Issued
- Apr 3, 2014
- Abate by
- May 16, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.177(d)(5): Current charts (rim manuals) containing instructions for the type of wheels being serviced were not available in the service area: On or about November 14, 2013, employees were exposed to struck-by hazards in thath the employer did not ensure that charts or rim manuals were available for the type of multi-piece rim tires the employees were inflating.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.215 A04
- Issued
- Apr 3, 2014
- Abate by
- May 16, 2014
- Penalty
- Initial $1,200 · Current $840 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: On or about November 19, 2013, employees were exposed to struck-by hazards in that the employer did not ensure that the work rest was adjusted closely to the wheel with a maximum opening of one-eighth of an inch.
Recent events (2)
- · I (S) $840
- · Z (S) $1200
1910.215 B09
- Issued
- Apr 3, 2014
- Abate by
- May 16, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: On or about November 19, 2013, employees were exposed to struck-by hazards in that the employer did not ensure the distance between the tongue guard and the abrasive wheel was adjusted one-fourth inch.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections in this industry (NAICS 441320)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339491094.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.