OSHA Inspection: STANTON VIEW DEVELOPMENT, LLC

Issued

2014-02-12 00:00:00

Abate by

2014-03-05 00:00:00

Penalty

Initial $1200.00 · Current $1200.00

General-duty citation text

29 CFR 1926.403(d)(1): Electric equipment was not firmly secured to the surface on which it was mounted:   a)  Unit 1, Basement - On or about 11/15/2013, a siding mechanic was exposed to a 120 volt shock hazard from an uncovered outlet box that was not mounted or otherwise secured in place.   For the purposes of this inspection, the employer was determined to be the controlling and correcting employer of the jobsite. The employer is being cited under OSHA's Multi-Employer Workplace Policy.   Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Issued

2014-02-12 00:00:00

Abate by

2014-03-05 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.403(i)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by cabinets or other forms of enclosures, nor by any of the means listed in subparagraphs (A) through (D) of this paragraph:    a)  Unit 1, Basement - On or about 11/15/2013, a vinyl siding mechanic was exposed to a 120 volt electrical contact hazard from an outlet box that was not provided with a cover.    For the purposes of this inspection, the employer was determined to be the controlling and correcting employer of the jobsite. The employer is being cited under OSHA's Multi-Employer Workplace Policy.   Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Issued

2014-02-12 00:00:00

Abate by

2014-03-05 00:00:00

Penalty

Initial $1200.00 · Current $1200.00

General-duty citation text

29 CFR 1926.1052(c)(1)(ii): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with a stair rail system along each unprotected side or edge:   a)  Unit 1, First Floor Stairs - On or about 11/15/2013, workers were exposed to a 10 foot fall from a set of stairs having more than four risers which had not been provided with a stair rail on its one open side.   b)  Unit 2, First Floor Stairs - On or about 11/15/2013, workers were exposed to a 10 foot fall from a set of stairs having more than four risers which had not been provided with a stair rail on its one open side.   For the purposes of this inspection, the employer was determined to be the controlling, correcting, creating and exposing employer of the jobsite. The employer is being cited under OSHA's Multi-Employer Workplace Policy.   Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Issued

2014-02-12 00:00:00

Abate by

2014-03-05 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.1052(c)(12): Unprotected sides and edges of stairway landings were not provided with guardrail systems that meet the criteria contained in Subpart M of 29 CFR 1926:    a)  Unit 1, First Floor Stairway Landing - On or about 11/15/2013, workers were exposed to a 10 ft. fall from a stair well opening which had not been provided with fall protection.    b)  Unit 2, First Floor Stairway Landing -  On or about 11/15/2013, workers were exposed to a 10 ft. fall from a stair well opening which had not been provided with fall protection.   For the purposes of this inspection, the employer was determined to be the exposing, controlling, creating and correcting employer of the jobsite. The employer is being cited under OSHA's Multi-Employer Workplace Policy.   Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.