PARK RIDGE, IL ·
OSHA Inspection: RENE PETRONEC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RENE PETRONEC in 418 N. ASHLAND AVE., PARK RIDGE, IL 60068 (NAICS 238160). OSHA activity number 339493769.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RENE PETRONEC
- Site address
- 418 N. ASHLAND AVE.
- City
- PARK RIDGE
- State
- IL
- ZIP
- 60068
- Mailing
- 7005 W. GUNNISON ST. APT. 2C, HARWOOD HEIGHTS, IL 60706
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 3
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1926.20 B01
- Issued
- Jan 23, 2014
- Penalty
- Initial $2,000 · Current $950 Reduced
General-duty citation text
29 CFR 1926.20(b)(1): The employer did not initiate or maintain an accident prevention program(s) as may be necessary to comply with this part: a) On or about November 18, 2013, a safety and health program, which would address those hazards associated with the employees' work environment and the company's procedures to eliminate those hazards had not been developed and maintained. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (S) $950
- · Z (S) $2000
1926.1053 B05 I
- Issued
- Jan 23, 2014
- Abate by
- Feb 4, 2014
- Penalty
- Initial $2,000 · Current $0 Reduced
General-duty citation text
29 CFR 1926.1053(b)(5)(i): Non-self-supporting ladders shall used at an angle such that the horizontal distance from the top support to the foot of the ladder is approximately one-quarter of the working length of the ladder (the distance along the ladder between the foot and the top support): a) Extension ladders being used to access the roof were not setup at a 4:1 angle. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (S) $0
- · Z (S) $2000
1926.100 A
- Issued
- Jan 23, 2014
- Abate by
- Feb 4, 2014
- Penalty
- Initial $1,600 · Current $750 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, shall be protected by protective helmets: a) Employees working below roofing operations exposed to struck-by hazards were not wearing hard hats. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (S) $750
- · Z (S) $1600
1926.501 B13
- Issued
- Jan 23, 2014
- Abate by
- Feb 4, 2014
- Penalty
- Initial $2,800 · Current $1,350 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet or more above lower levels was not protected by guardrail systems, safety net systems, or personal fall arrest systems, nor did the employer demonstrate that it is infeasible or creates a greater hazard to use these systems and develop and implement a fall protection plan which meets the requirements of paragraph (k) of section 1926.502: a) Employees performing roofing work were exposed to fall hazards of approximately 15 feet. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- · I (S) $1350
- · Z (S) $2800
1926.503 A01
- Issued
- Jan 23, 2014
- Abate by
- Feb 19, 2014
- Penalty
- Initial $2,000 · Current $950 Reduced
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: a) Employees were exposed to fall hazards while performing roofing work and the employer did not provide a training program to recognize fall hazards and the procedures to be followed in order to minimize those hazards. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (S) $950
- · Z (S) $2000
More inspections in this industry (NAICS 238160)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339493769.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.