CEDAR CREEK, TX ·
OSHA Inspection: CAPITOL FEED & MILLING
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CAPITOL FEED & MILLING in 2299 HWY 71, CEDAR CREEK, TX 78612 (NAICS 493130). OSHA activity number 339496499.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CAPITOL FEED & MILLING
- Site address
- 2299 HWY 71
- City
- CEDAR CREEK
- State
- TX
- ZIP
- 78612
- Mailing
- 2299 HWY 71, CEDAR CREEK, TX 78612
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 493130
- Employees
- 7
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
1910.22 D01
- Issued
- Jan 31, 2014
- Abate by
- Mar 20, 2014
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.22(d)(1): On every building or other structure, or part thereof, used for mercantile, business, industrial or storage purposes, the loads approved by the building official were not marked on plates of approved design and securely affixed in a conspicuous place in each space to which they relate. On or about, November 21, 2013 load rating plates were not affixed on the excess storage platform, exposing employees to a fall hazard.
Recent events (2)
- · I (S) $960
- · Z (S) $1600
1910.23 C01
- Issued
- Jan 31, 2014
- Abate by
- Feb 20, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.23(c)(1): Open-sided floor(s) or platform(s) 4 feet (1.22 m) or more above the adjacent floor or ground level were not guarded by standard railings (or the equivalent as specified in 29 CFR 1910.23(e)(3)(i) through (v)), on all open sides: On or about November 21, 2013, the excess storage area on the second level platform that is up to approximately 8 feet high did not include guard rails, exposing employees to a fall hazard.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.23 D01 II
- Issued
- Jan 31, 2014
- Abate by
- Mar 20, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.23(d)(1)(ii): Stairway(s) less than 44 inches wide having one side open, did not have at least one stair railing in accordance with (e)(1) on the open side: Note: 1910.23(e)(1) A standard railing shall consist of top rail, intermediate rail, and posts, and shall have a vertical height of 42 inches nominal from upper surface of top rail to floor, platform, runway, or ramp level. The top rail shall be smooth-surfaced throughout the length of the railing. The intermediate rail shall be approximately halfway between the top rail and the floor, platform, runway, or ramp. The ends of the rails shall not overhang the terminal posts except where such overhang does not constitute a projection hazard. On or about October 25, 2013, the stairway leading to flat storage did not include standard stair railing with a mid rail, exposing employees to a fall hazard.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections in this industry (NAICS 493130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339496499.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.