ALDEN, NY —
OSHA Inspection: BENNETT MANUFACTURING COMPANY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BENNETT MANUFACTURING COMPANY in 13315 RAILROAD STREET, ALDEN, NY 14004 (NAICS 332312). OSHA activity number 339496606.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BENNETT MANUFACTURING COMPANY
- Site address
- 13315 RAILROAD STREET
- City
- ALDEN
- State
- NY
- ZIP
- 14004
- Mailing
- 13315 RAILROAD STREET, ALDEN, NY 14004
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 49
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C04 II B
- Issued
- Dec 12, 2013
- Abate by
- Jan 12, 2014
- Penalty
- Initial $2,625 · Current $1,969 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedure did not clearly and specifically outline specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy: a) On or about 11/25/2013 throughout establishment; where the energy control procedures did not contain specific energy control procedures for each piece of equipment which required its own specific procedures such as, but not limited to mechanical power presses and press brakes. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $1968.75
- — Z (S) $2625
1910.147 C04 II C
- Issued
- Dec 12, 2013
- Abate by
- Jan 12, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(C): The energy control procedure did not clearly and specifically outline the steps for placement, removal and transfer of lockout devices or tagout devices and the responsibility for them: a) On or about 11/26/2013; where the energy control procedures did not have specific, documented procedures for removal of energy control locks by other than the person who applied the device. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.151 C
- Issued
- Dec 12, 2013
- Abate by
- Jan 12, 2014
- Penalty
- Initial $2,625 · Current $1,969 Reduced
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: a) On or about 11/25/2013 out side the boiler room; where corrosive boiler treatment chemicals such as, RL-1000 and BT-2200M are dispensed. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $1968.75
- — Z (S) $2625
1910.107 B05 I
- Issued
- Dec 12, 2013
- Abate by
- Jan 12, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.107(b)(5)(i): Visible gauges or audible alarms or pressure activated devices were not installed to indicate or insure that the required air velocity is maintained: a) On or about 11/26/2013 in the paint shop; where the spray booth used for application of combustible powder coatings was not equipped with a device, alarm or guage to measure air flow across the face of the booth. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.147 C05 II
- Issued
- Dec 12, 2013
- Abate by
- Jan 7, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(5)(ii): Lockout devices and tagout devices were utilized for other purposes than controlling energy: a) On or about 11/25/2013 in the press area; where a "lockout lock" was used to secure a mechanical power press (the Warco press) in an "out of service" condition. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.157 G02
- Issued
- Dec 12, 2013
- Abate by
- Jan 12, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(g)(2): The educational program to familiarize employees with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting was not provided to all employees upon initial employment, and at least annually thereafter: a) On or about 11/26/2013 throughout establishment; where all employees are allowed or permitted to use portable fire extinguishers to fight incipient stage fires, fire extinguisher education was last provided in 2011. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Bennett Manufacturing Company
View Bennett Manufacturing Company's full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339496606.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.