GAHANNA, OH ·
OSHA Inspection: LIND STONE WORKS
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of LIND STONE WORKS in 1195 TECHNOLOGY DRIVE, GAHANNA, OH 43230 (NAICS 327991). OSHA activity number 339502189.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LIND STONE WORKS
- Site address
- 1195 TECHNOLOGY DRIVE
- City
- GAHANNA
- State
- OH
- ZIP
- 43230
- Mailing
- 1195 TECHNOLOGY DRIVE, GAHANNA, OH 43230
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327991
- Employees
- 6
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.178 L01 II
- Issued
- Mar 10, 2014
- Abate by
- Mar 28, 2014
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1910.178(l)(1)(ii): Prior to permitting an employee to operate a powered industrial truck (except for training purposes), the employer shall ensure that each operator has successfully completed the training required by this paragraph (l), except as permitted by paragraph (l)(5). a. Located at Lind Stone Works, employees were not provided with formal instruction, practical training, and an evaluation of the operator's performance prior to allowing the employees to operate forklifts.
Recent events (1)
- · Z (S) $1600
1910.305 G02 III
- Issued
- Mar 10, 2014
- Abate by
- Mar 28, 2014
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables shall be connected to devices and fittings so that strain relief is provided that will prevent pull from being directly transmitted to joints or terminal screws. a. Located in the fabrication shop, employees operated a wet saw from a pendant control box that did not have strain relief provided to prevent the employees from an electrical shock hazard of 110 volts.
Recent events (1)
- · Z (S) $2000
1910.306 B01 I
- Issued
- Mar 10, 2014
- Abate by
- Mar 28, 2014
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1910.306(b)(1): Disconnecting means for runway conductors. A disconnecting means shall be provided between the runway contact conductors and the power supply. Such disconnecting means shall consist of a motor-circuit switch, circuit breaker, or molded case switch. The disconnecting means shall open all ungrounded conductors simultaneously and shall be: 29 CFR 1910.306(b)(1)(i): Readily accessible and operable from the ground or floor level; a. Located in the fabrication shop, there was a crane dock rail disconnect for a 3 ton underhung overhead crane that was not readily accessible to the employees working in the shop due to material stored in front of the disconnect box, thereby exposing the employees to additional hazards such as electrical shock if an incident were to occur with an underhung crane.
Recent events (1)
- · Z (S) $2000
More inspections in this industry (NAICS 327991)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339502189.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.