SAN ANTONIO, TX ·
OSHA Inspection: C. STUART CAST STONE, LTD.
Programmed Related inspection · Health discipline
At a glance
On , OSHA opened a programmed Related health inspection of C. STUART CAST STONE, LTD. in 1407 HOEFGEN AVE., SAN ANTONIO, TX 78210 (NAICS 327390). OSHA activity number 339507303.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- C. STUART CAST STONE, LTD.
- Site address
- 1407 HOEFGEN AVE.
- City
- SAN ANTONIO
- State
- TX
- ZIP
- 78210
- Mailing
- 1407 HOEFGEN AVE., SAN ANTONIO, TX 78210
What kind of inspection was it?
- Inspection type
- Programmed Related (I)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327390
- Employees
- 9
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1910.213 C01
- Issued
- Jan 17, 2014
- Abate by
- Feb 2, 2014
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: Wood Mold Making Area, Southeast side: On or about December 4, 2013, employee(s) were exposed to an amputation hazard while operating a SawStop 10 inch Industrial Cabinet Saw (Model ICS31230, SN I080700966) which was not equipped with a blade guard for the portion of the saw above the table and above the material being cut.
Recent events (2)
- · I (S) $1200
- · Z (S) $2000
1910.213 C02
- Issued
- Jan 17, 2014
- Abate by
- Feb 2, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: Wood Mold Making Area, Southeast side: On or about December 4, 2013, employee(s) were exposed to a struck-by hazard while operating a SawStop 10 inch Industrial Cabinet Saw (Model ICS31230, SN I080700966) which was not equipped with a spreader.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.213 C03
- Issued
- Jan 17, 2014
- Abate by
- Feb 2, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: Wood Mold Making Area, Southeast side: On or about December 4, 2013, employee(s) were exposed to a struck-by hazard while operating a SawStop 10 inch Industrial Cabinet Saw (Model ICS31230, SN I080700966) which was not equipped with non kickback fingers or dogs.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.334 A01
- Issued
- Jan 17, 2014
- Abate by
- Feb 2, 2014
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.334(a)(1): Flexible electric cords were fastened with staples or otherwise hung in such a fashion as could damage the outer jacket or insulation: Mixing Area, South side: On or about December 4, 2013, and times prior there to, employee(s) were exposed to an electrical hazard from a flexible electrical cord which was was used to power a Northern Industrial Tools Electric Hoist (750/1500 lb. capacity) and was hung over a metal rod in a fashion that could damage the outer jacket of the cord.
Recent events (2)
- · I (S) $960
- · Z (S) $1600
More inspections at C. Stuart Cast Stone, LTD.
View C. Stuart Cast Stone, LTD.'s full OSHA safety record →
More inspections in this industry (NAICS 327390)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339507303.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.