AUBURN, NY —
OSHA Inspection: NEW HOPE MILLS MANUFACTURING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of NEW HOPE MILLS MANUFACTURING, INC. in 181 YORK STREET, AUBURN, NY 13021 (NAICS 311822). OSHA activity number 339507675.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NEW HOPE MILLS MANUFACTURING, INC.
- Site address
- 181 YORK STREET
- City
- AUBURN
- State
- NY
- ZIP
- 13021
- Mailing
- 181 YORK STREET, AUBURN, NY 13021
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311822
- Employees
- 46
- Ownership type
- A
Citations
9 citations on file for this inspection.
1910.307 C
- Issued
- Feb 20, 2014
- Abate by
- May 1, 2014
- Penalty
- Initial $2,975 · Current $1,488 Reduced
General-duty citation text
29 CFR 1910.307(c): Equipment, wiring methods, and installations of equipment in hazardous (classified) locations were not intrinsically safe, approved for the hazardous (classified) location, or safe for the hazardous (classified) location: a) Mixing Area, on or about 1/24/14: Goodway vacuum, model DV-CD used to collect Class II combustible dust is not approved for that use.
Recent events (3)
- — J (S) $1487.5
- — C (S) $2975
- — Z (S) $2975
1910.23 C01
- Issued
- Jan 29, 2014
- Abate by
- May 1, 2014
- Penalty
- Initial $2,975 · Current $0 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards:Note: Toeboards are only required when persons can pass, there is moving equipment or there is equipment with which falling materials could create a hazard. a) Mixing Room, on or about 12/4/13: Upper level mezzanine, swing gate was not secured and exposed workers to a 9 foot 2 inch fall hazard.
Recent events (3)
- — J (O) $0
- — C (S) $2975
- — Z (S) $2975
1910.36 D01
- Issued
- Jan 29, 2014
- Abate by
- May 1, 2014
- Penalty
- Initial $2,380 · Current $1,190 Reduced
General-duty citation text
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge: a) Warehouse, on or about 12/4/13: Northwest exit door is equipped with an auto locking device that was not functioning properly and prevented emergency egress from the area. b) Storage Room/Receiving Dock, on or about 12/4/13: Exit door was locked and blocked by machinery, thereby preventing emergency egress from this area.
Recent events (3)
- — J (S) $1190
- — C (S) $2380
- — Z (S) $2380
1910.37 A03
- Issued
- Jan 29, 2014
- Abate by
- May 1, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed: a) Storage Room/Loading Dock area, on or about 12/4/13: Exit route was blocked by a machine which prevented use of the exit door.
Recent events (3)
- — J (S) $0
- — C (S) $0
- — Z (S) $0
1910.134 C02 I
- Issued
- Jan 29, 2014
- Abate by
- May 1, 2014
- Penalty
- Initial $1,785 · Current $893 Reduced
General-duty citation text
29 CFR 1910.134(c)(2)(i): The employer did not determine if the voluntary use of a respirator did not in itself create a hazard: a) Production Room, on or about 12/4/13: The employer did not determine if the voluntary use of a 3M half mask respirator with organic vapor cartridges was appropriate for the protection against dust.
Recent events (3)
- — J (S) $892.5
- — C (S) $1785
- — Z (S) $1785
1910.134 C02 II
- Issued
- Jan 29, 2014
- Abate by
- May 1, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(2)(ii): The employer did not establish and implement those elements of a written program necessary to ensure that any employee using a respirator voluntarily was medically able to use that respirator, and that the respirator was cleaned, stored, and maintained so that its use does not present a health hazard to the user: a) Production Room, on or about 12/4/13: The employer did not ensure that an employee who was voluntarily wearing a 3M half mask respirator was medically able to use that respirator.
Recent events (3)
- — J (S) $0
- — C (S) $0
- — Z (S) $0
1910.134 K06
- Issued
- Jan 29, 2014
- Abate by
- May 1, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer: a) Production Room, on or about 12/4/13: The employer did not provide Appendix D of 29 CFR 1910.134 to employees who voluntarily wear respirators.
Recent events (3)
- — J (S) $0
- — C (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Jan 29, 2014
- Abate by
- May 1, 2014
- Penalty
- Initial $2,380 · Current $1,190 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Packing Room, on or about 12/4/13: Panama Seamer had rotating parts that were not fully guarded.
Recent events (3)
- — J (S) $1190
- — C (S) $2380
- — Z (S) $2380
1910.242 B
- Issued
- Jan 29, 2014
- Abate by
- May 1, 2014
- Penalty
- Initial $2,380 · Current $1,190 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i: a) Mixing Room, near Mixer-A, on or about 12/4/13: Compressed air greater than 100 p.s.i. is used for cleaning purposes.
Recent events (3)
- — J (S) $1190
- — C (S) $2380
- — Z (S) $2380
More inspections at NEW Hope Mills Manufacturing, INC.
View NEW Hope Mills Manufacturing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 311822)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339507675.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.