Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: JOSE GONZALEZ

Unprogrammed Other inspection · Safety discipline

On , OSHA opened an unprogrammed Other safety inspection of JOSE GONZALEZ in 1056 TEXAN TRAIL, GRAPEVINE, TX 76092 (NAICS 238160). OSHA activity number 339508202.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Jose Gonzalez — free Get an email when a new federal OSHA severe-injury report for Jose Gonzalez is published. One employer, no account, unsubscribe in one click.
Establishment
JOSE GONZALEZ
Site address
1056 TEXAN TRAIL
City
GRAPEVINE
State
TX
ZIP
76092
Mailing
2013 WOODS LN., HALTOM CITY, TX 76117
Inspection type
Unprogrammed Other (I)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
3
Ownership type
A

3 citations on file for this inspection.

1926.307 D01

Serious Gravity 5 1 instance 4 exposed
Issued
Mar 19, 2014
Abate by
Apr 16, 2014
Penalty
Initial $1,600 · Current $1,000 Reduced
29 CFR 1926.307(d)(1): Pulley(s) with part(s) seven feet (2.128 m) or less from the floor or work platform were not guarded in accordance with the requirements specified in paragraphs  (m) and  (o) of this section.      On or about December 3, 2013, the pulley on the Ridgid air compressor was not guarded prior to employees use, exposing employees to rotating parts.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $1600

1926.307 E01

Serious Gravity 5 1 instance 4 exposed
Issued
Mar 19, 2014
Abate by
Apr 16, 2014
Penalty
Initial $0 · Current $0
29 CFR 1926.307(e)(1): Belt(s) with part(s) seven feet (2.128 m) or less from the floor or work platform were not guarded in accordance with the requirements specified in paragraphs  (m) and  (o) of this section:    On or about December 3, 2013, the belt on the Ridgid air compressor was not guarded prior to employee's use, exposing employees to rotating parts.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.501 B13

Repeat Gravity 10 1 instance 4 exposed
Issued
Mar 19, 2014
Abate by
Apr 16, 2014
Penalty
Initial $5,600 · Current $4,000 Reduced
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b).    On or about December 3, 2013, employees performing roofing work without fall protection were exposed to a fall hazard of approximately 13 feet to the ground below.       The Jose Gonzalez was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501(b)(13), which was contained in OSHA inspection number 314276247, citation number 1, item number 1 and was affirmed as a final order on May 5, 2011 with a final abatement date of May 16, 2011, with respect to a workplace located at 2137 Kingsdale, Fort Worth, Texas 76119.
Recent events (2)
  • — I (R) $4000
  • — Z (R) $5600

View Jose Gonzalez's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339508202.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.