LAMAR, MO ·
OSHA Inspection: SCI BOX*
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SCI BOX* in 1701 MAPLE STREET, LAMAR, MO 64759 (NAICS 322211). OSHA activity number 339509606.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SCI BOX*
- Site address
- 1701 MAPLE STREET
- City
- LAMAR
- State
- MO
- ZIP
- 64759
- Mailing
- 515 S. FIRST STREET, MOUNT VERNON, IL 62864
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 322211
- Employees
- 17
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
1910.147 C04 I
- Issued
- Dec 31, 2013
- Abate by
- Jan 28, 2014
- Penalty
- Initial $2,100 · Current $1,470 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) Specific lock out procedures had not been developed for the 50 die cutter Flex o 86 Semi auto taper gluer machine. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- · I (S) $1470
- · Z (S) $2100
1910.212 A01
- Issued
- Dec 31, 2013
- Abate by
- Jan 28, 2014
- Penalty
- Initial $2,800 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by: (a) The Delta-Rockwell 10" radial arm saw used to cut corner cardboard pieces was missing the lower portion of the blade guard exposing employees to point of operation hazards. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- · I (S) $0
- · Z (S) $2800
1910.305 B01 I
- Issued
- Dec 31, 2013
- Abate by
- Jan 28, 2014
- Penalty
- Initial $2,100 · Current $0 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(i): Openings through which conductors entered cutout boxes, cabinets, or fittings were not effectively closed: (a) Holes in an electrical box due to missing knockouts were not filled exposing employees to electrical shock hazards. The box was located directly behind the Delta Rockwell radial arm saw. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- · I (S) $0
- · Z (S) $2100
More inspections in this industry (NAICS 322211)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339509606.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.