Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,198,201Inspections Most recent open 2026-08-31 Last loaded 2026-09-03

OSHA Inspection: MANCINAS CUSTOM

Unprogrammed Related inspection · Health discipline

On , OSHA opened an unprogrammed Related health inspection of MANCINAS CUSTOM in 403 HIGHLAND AVENUE, BOULDER, CO 80302 (NAICS 238390). OSHA activity number 339514812.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Mancinas Custom for free Get an email when a new federal OSHA severe-injury report for Mancinas Custom is published. One employer, no account, unsubscribe in one click.
Establishment
MANCINAS CUSTOM
Site address
403 HIGHLAND AVENUE
City
BOULDER
State
CO
ZIP
80302
Mailing
15500 E COLFAX AVE LOT 3, AURORA, CO 80011
Inspection type
Unprogrammed Related (G)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238390
Employees
2
Ownership type
Private (A)

3 citations on file for this inspection.

1910.1200 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 31, 2014
Abate by
Apr 8, 2014
Penalty
Initial $1,360 · Current $1,360
29 CFR 1910.1200(e)(1): Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:  (a)         Mancinas Custom at 403 Highland Avenue, Boulder, CO 80302: On and before 12/3/13, the employer did not develop a written hazrd communication program. This condition exposed employees to physical and health hazards associated with silica.    Abatement Note: The requirements applicable to construction work under 29 CFR 1926.56 are identical to those set forth at 29 CFR 1910.1200 of this chapter.  Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (1)
  • · Z (S) $1360

1910.1200 H01

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 31, 2014
Abate by
Apr 8, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employers shall provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new chemical hazard the employees have not previously been trained about is introduced into their work area. Information and training may be designed to cover categories of hazards (e.g., flammability, carcinogenicity) or specific chemicals. Chemical-specific information must always be available through labels and safety data sheets.  (a)         Mancinas Custom at 403 Highland Avenue, Boulder, CO 80302: On and before 12/3/13, the employer did not provide employees with effective informaton and training on the hazards of silica while cutting flagstone. This condition exposed employees to physical and health hazards associated with silica.    Abatement Note: The requirements applicable to construction work under 29 CFR 1926.56 are identical to those set forth at 29 CFR 1910.1200 of this chapter.  Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (1)
  • · Z (S) $0

1910.134 D01 III

Other-than-serious 1 instance 2 exposed
Issued
Mar 31, 2014
Abate by
Apr 6, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.134(d)(1)(iii):  The employer did not identify and evaluate the respiratory hazard(s) in the workplace which includes a reasonable estimate of employee exposures to respiratory hazards:     (a)  Mancinas Custom at 403 Highland Avenue, Boulder, CO 80302: On and before 12/3/13, the employer did not evaluate the respiratory hazard of respirable crystalline silica during the stone cutting operation.  Mancinas Custom employees were cutting flagstone for a new patio.  This condition exposed employees to the respiratory hazards associated with respirable crystalline silica.    Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (1)
  • · Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339514812.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.