Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,124Inspections Most recent open 2026-08-25 Last loaded 2026-08-28

OSHA Inspection: MAC DEMO LLC

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of MAC DEMO LLC in 17 N. PARK PLACE, MORRISTOWN, NJ 07960 (NAICS 238910). OSHA activity number 339518318.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch MAC Demo LLC for free Get an email when a new federal OSHA severe-injury report for MAC Demo LLC is published. One employer, no account, unsubscribe in one click.
Establishment
MAC DEMO LLC
Site address
17 N. PARK PLACE
City
MORRISTOWN
State
NJ
ZIP
07960
Mailing
405 PASSAIC AVE, LODI, NJ 07644
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238910
Employees
5
Ownership type
Private (A)

7 citations on file for this inspection.

1910.134 C

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 18, 2014
Penalty
Initial $2,000 · Current $1,200 Reduced

Hazardous substances 9010

29 CFR 1910.134(c) as referenced by 29 CFR 1926.103: The employer did not develop and implement a written respiratory protection program with required worksite-specific procedures and elements for required respirator use:    a) 17 N. Park Place, Morristown, NJ    The employer did not develop and implement a written respiratory protection program for employees required to wear half mask negative pressure elastomeric  respirators for protection against dust containing silica while performing demolition of a vault structure with a hydraulic hammer and cutting saw.    Violation occurred on or about 12-10-13
Recent events (2)
  • · I (S) $1200
  • · Z (S) $2000

1910.134 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 18, 2014
Penalty
Initial $0 · Current $0

Hazardous substances 9010

29 CFR 1910.134(e)(1) as referenced by 29 CFR 1926.103: The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace  a) 17 N. Park Place, Morristown, NJ  The employer did not provide medical evaluations for employees required to wear half mask negative pressure elastomeric respirators for protection against dust containing silica while performing demolition of a vault structure with a hydraulic hammer and cutting saw.    Violation occurred on or about 12-10-13
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.134 F01

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 18, 2014
Penalty
Initial $0 · Current $0

Hazardous substances 9010

29 CFR 1910.134(f)(1) :  The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT)  a) 17 N. Park Place, Morristown, NJ  The employer failed to fit test workers required to use a half mask negative pressure elastomeric respirators  for protection against dust containing silica while performing demolition of a vault structure with a hydraulic hammer and cutting saw.     Violation occurred on or about 12-10-13
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.134 K03

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 18, 2014
Penalty
Initial $0 · Current $0

Hazardous substances 9010

29 CFR 1910.134(k)(3): Training was not provided prior to requiring employees to use a respirator in the workplace:  a) 17 N. Park Place, Morristown, NJ  The employer did not train workers on the safe use, care, and limitations of half mask negative pressure elastomeric respirators required for protection against dust containing silica while performing demolition of a vault structure with a hydraulic hammer and cutting saw.   Violation occurred on or about 12-10-13
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.1200 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 18, 2014
Penalty
Initial $2,000 · Current $1,200 Reduced

Hazardous substances 9010

29 CFR 1910.1200(e)(1)  as referenced by 29 CFR 1926.59:   Employer had not developed or implemented a written hazard communication program included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii):      a) 17 N. Park Place, Morristown, NJ    The employer did not develop and implement a written hazard communication program for workers exposed to carbon monoxide and silica while using a gasoline powered cutting saw and a diesel powered excavator to perform demolition of a concrete vault structure.     Violation occurred on or about 12-10-13
Recent events (2)
  • · I (S) $1200
  • · Z (S) $2000

1910.1200 G01

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 18, 2014
Penalty
Initial $0 · Current $0

Hazardous substances 9010

29 CFR 1910.1200(g)(1) as referenced by 29 CFR 1926.59:  Employers did not have a safety data sheet in the workplace for each hazardous chemical which they use:   a) 17 N. Park Place, Morristown, NJ  The employer did not provide safety data sheets for chemicals including but not limited to carbon monoxide and silica, for employees using a gasoline powered cutting saw and a diesel powered excavator, while performing demolition of a concrete vault structure.   Violation occurred on or about 12-10-13
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.1200 H01

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 18, 2014
Penalty
Initial $0 · Current $0

Hazardous substances 9010

29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  a) 17 N. Park Place, Morristown, NJ  The employer did not provide employees with training on chemicals they were exposed to including but not limited to carbon monoxide and silica while using a gasoline powered cutting saw and a diesel powered excavator to perform demolition of a concrete vault structure.   Violation occurred on or about 12-10-13
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339518318.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.