NEW HAMPTON, NY ·
OSHA Inspection: PROGRESSIVE VENTURES, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of PROGRESSIVE VENTURES, INC. in 2 CANNON HILL DRIVE, NEW HAMPTON, NY 10958 (NAICS 811121). OSHA activity number 339518938.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PROGRESSIVE VENTURES, INC.
- Site address
- 2 CANNON HILL DRIVE
- City
- NEW HAMPTON
- State
- NY
- ZIP
- 10958
- Mailing
- 2 CANNON HILL DRIVE, NEW HAMPTON, NY 10958
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811121
- Employees
- 20
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.134 C01
- Issued
- May 2, 2014
- Abate by
- May 29, 2014
- Penalty
- Initial $1,700 · Current $1,020 Reduced
General-duty citation text
29 CFR 1910.134(c)(1): The employer did not establish and implement a written respiratory protection program with worksite-specific procedures in any workplace where respirators are necessary to protect the health of the employee or whenever respirators are required by the employer: a) Autobody Shop - On and prior to December 12, 2013 for the employees that are required to wear half face air purifying respirators while sanding, painting, and conducting abrasive blasting.
Recent events (2)
- · I (S) $1020
- · Z (S) $1700
1910.134 E01
- Issued
- May 2, 2014
- Abate by
- May 29, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator before the employee was fit tested or required to use the respirator in the workplace: a) Autobody Shop - On and prior to December 12, 2013 for the employees that are required to wear half face air purifying respirators while sanding, painting, and conducting abrasive blasting.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.178 L01 I
- Issued
- May 2, 2014
- Abate by
- Jun 13, 2014
- Penalty
- Initial $1,700 · Current $1,020 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) Autobody Shop - On and prior to December 12, 2012, employees operated a Clark powered industrial truck (Model CB00-30, Serial # 235-250-3675) without training and evaluation of operating performance.
Recent events (2)
- · I (S) $1020
- · Z (S) $1700
1910.178 Q07
- Issued
- May 2, 2014
- Abate by
- Jun 13, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service: a) Autobody Shop - On and prior to December 12, 2012, employees operated a Clark powered industrial truck (Model CB00-30, Serial # 235-250-3675) without conducting daily inspection.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.1200 E01
- Issued
- May 2, 2014
- Abate by
- Jun 20, 2014
- Penalty
- Initial $1,020 · Current $612 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program which at included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii): a) Autobody Shop - On and prior to December 12, 2013, for the employees using chemicals, such as, but not limited to paints, tints, hardeners, hazardous waste, clear coats, sand blasting media, and body fillers (containing chemicals such as xylene, toluene, n-butyl acetate, isocyanates, acetone, styrene, methyl methacrylate - flammable and toxic).
Recent events (2)
- · I (S) $612
- · Z (S) $1020
1910.1200 H01
- Issued
- May 2, 2014
- Abate by
- Jun 20, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) Autobody Shop - On and prior to December 12, 2013, for the employees using chemicals, such as, but not limited to paints, tints, hardeners, hazardous waste, clear coats, sand blasting media, and body fillers (containing chemicals such as xylene, toluene, n-butyl acetate, isocyanates, acetone, styrene, methyl methacrylate - flammable and toxic).
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections in this industry (NAICS 811121)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339518938.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.