Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: QUARK ENTERPRISES, INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of QUARK ENTERPRISES, INC. in 320 MORTON AVENUE, ROSENHAYN, NJ 08352 (NAICS 327215). OSHA activity number 339522575.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Quark Enterprises, INC. — free Get an email when a new federal OSHA severe-injury report for Quark Enterprises, INC. is published. One employer, no account, unsubscribe in one click.
Site address
320 MORTON AVENUE
City
ROSENHAYN
State
NJ
ZIP
08352
Mailing
P.O. BOX 23, VINELAND, NJ 08362
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
327215
Employees
20
Ownership type
A

10 citations on file for this inspection.

1910.133 A01

Serious Gravity 5 2 instances 2 exposed
Issued
Jan 27, 2014
Abate by
Feb 21, 2014
Penalty
Initial $2,000 · Current $1,500 Reduced
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation:  a) Grinding and polishing room - The wearing of safety glasses with side shields was not enforced for employees who used mechanical equipment to grind, cut, and polish glass tubes. On or about 12/16/13.  b) Grinding and polishing room - Employees who dispensed and used 45% to 55% hydrofluoric acid to etch glass were not provided with chemical splash goggles and face shields. On or about 12/16/13.  NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
  • — I (S) $1500
  • — Z (S) $2000

1910.151 C

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 27, 2014
Abate by
Feb 21, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:  a) Grinding and polishing room - The hand held shower nozzle mounted on the utility sink next to the work bench where a corrosive chemical (45% to 55% hydrofluoric acid) was dispensed and used did not meet ANSI requirements for an eye wash. It could not be used hands-free. On or about 12/16/13.  NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 E01

Serious Gravity 1 1 instance 1 exposed
Issued
Jan 27, 2014
Abate by
Feb 21, 2014
Penalty
Initial $1,200 · Current $900 Reduced
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee�s ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  a) Grinding and polishing room - Employees who wore tight fitting negative pressure half mask air purifying respirators including, but not limited to Survivair Valvair Plus respirators when dispensing and using 45% to 55% hydrofluoric acid were not medically evaluated. On or about 12/16/13.   NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • — I (S) $900
  • — Z (S) $1200

1910.178 L01 I

Serious Gravity 1 1 instance 1 exposed
Issued
Jan 27, 2014
Abate by
Feb 21, 2014
Penalty
Initial $1,200 · Current $900 Reduced
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  a) Establishment  Employees who operated a Toyota propane forklift (model #7FOU18, serial number 62850) were not trained as required by the standard. On or about 12/16/13.  NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • — I (S) $900
  • — Z (S) $1200

1910.215 A04

Serious Gravity 1 1 instance 5 exposed
Issued
Jan 27, 2014
Abate by
Feb 21, 2014
Penalty
Initial $1,200 · Current $900 Reduced
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:  a)  Grinding and polishing room - The tool rest on the left side of the C.H. Distributors, Inc. bench grinder (model E-8, serial number W3 04) was adjusted to approximately 5/8 inch from the abrasive wheel. On or about 12/16/13.  NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • — I (S) $900
  • — Z (S) $1200

1910.215 B09

Serious Gravity 1 1 instance 5 exposed
Issued
Jan 27, 2014
Abate by
Feb 21, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:  a) Grinding and polishing room - The tongue guard on the left side of the C.H. Distributors, Inc. bench grinder (model E-8, serial number W3 04) was adjusted to approximately one inch from the abrasive wheel. On or about 12/16/13.  NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 E01

Serious Gravity 5 1 instance 10 exposed
Issued
Jan 27, 2014
Abate by
Feb 21, 2014
Penalty
Initial $2,000 · Current $1,500 Reduced
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  a) Establishment - A site specific written chemical hazard communication was not developed. Employees used chemical products including, but not limited to 45% to 55% hydrofluoric acid, Aquadag M (graphite in water), and propane. On or about 12/16/13.  NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • — I (S) $1500
  • — Z (S) $2000

1910.1200 F05 I

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 27, 2014
Abate by
Feb 21, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(f)(5)(i): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the identity of the hazardous chemical(s) contained therein:  a) Grinding and polishing room, cabinet beneath the fume hood - A small container of 45% to 55% hydrofluoric acid was not labeled. On or about 12/16/13.   NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H01

Serious Gravity 5 1 instance 10 exposed
Issued
Jan 27, 2014
Abate by
Feb 21, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  a) Establishment - Employees were not trained in the hazards of chemicals in the workplace including, but not limited to 45% to 55% hydrofluoric acid, Aquadag M (graphite in water), and propane. On or about 12/16/13.  NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 C02 II

Other-than-serious 1 instance 1 exposed
Issued
Jan 27, 2014
Abate by
Feb 21, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.134(c)(2)(ii): The employer did not establish and implement those elements of a written program necessary to ensure that any employee using a respirator voluntarily was medically able to use that respirator, and that the respirator was cleaned, stored, and maintained so that its use does not present a health hazard to the user:  a) Grinding and polishing room - A site specific written respirator program was not developed. Employees wore tight fitting negative pressure half mask air purifying respirators including, but not limited to Survivair Valvair Plus respirators when dispensing and using 45% to 55% hydrofluoric acid. On or about 12/16/13.   NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339522575.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.