NORTON, KS —
OSHA Inspection: NEW AGE INDUSTRIAL CORP., INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of NEW AGE INDUSTRIAL CORP., INC. in 1000 E. HWY 36, NORTON, KS 67654 (NAICS 333294). OSHA activity number 339526626.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NEW AGE INDUSTRIAL CORP., INC.
- Site address
- 1000 E. HWY 36
- City
- NORTON
- State
- KS
- ZIP
- 67654
- Mailing
- P.O. BOX 520, NORTON, KS 67654
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333294
- Employees
- 120
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jan 16, 2014
- Abate by
- Apr 14, 2014
- Penalty
- Initial $4,500 · Current $3,150 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: Employees engaged in maintenance activities at pieces of equipment throughout the facility utilizing multiple energy sources were exposed to electrical, struck-by and caught-between hazards in that machine specific procedures had not been fully developed and implemented.
Recent events (2)
- — I (S) $3150
- — Z (S) $4500
1910.212 A01
- Issued
- Jan 16, 2014
- Abate by
- Mar 24, 2014
- Penalty
- Initial $4,500 · Current $3,150 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Employees engaged in cutting activities using the automated Oliver saw in the South end of the main builidng were exposed to struck-by hazards in that approximately 5 inches of the blade was not guarded.
Recent events (2)
- — I (S) $3150
- — Z (S) $4500
1910.215 B09
- Issued
- Jan 16, 2014
- Abate by
- Mar 24, 2014
- Penalty
- Initial $2,700 · Current $1,890 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: Employees engaged in grinding activities at the bench grinder located in the die prep area were exposed to struck-by hazards in that the distance from the abrasive wheel to the adjustable tongue guard was found to be approximately 3/4 inch.
Recent events (2)
- — I (S) $1890
- — Z (S) $2700
1910.219 D01
- Issued
- Jan 16, 2014
- Abate by
- Mar 24, 2014
- Penalty
- Initial $2,700 · Current $1,890 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): Employees engaged in saw operations at the automated Oliver saw loacted in the South end of the main building were exposed to caught between hazards in that a horizontal belt and pulley approximately 72 inches above the ground was not guarded.
Recent events (2)
- — I (S) $1890
- — Z (S) $2700
1910.219 E02 I
- Issued
- Jan 16, 2014
- Abate by
- Mar 24, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(2)(i): Overhead horizontal belt(s) with lower parts seven -7 feet or less from the floor(s) or platform(s) were not guarded on the sides and bottom in accordance with the requirements specified at CFR 1910.219(o)(3)(a): Employees engaged in saw operations at the automated Oliver saw located in the South end of the main building were exposed to caught between hazards in that a horizontal belt and pulley approximately 72 inches above the ground was not guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at NEW AGE Industrial Corp., INC.
View NEW AGE Industrial Corp., INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333294)
More inspections in KS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339526626.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.