STOCKTON, MO ·
OSHA Inspection: HAMMONS PRODUCTS COMPANY*
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HAMMONS PRODUCTS COMPANY* in 105 HAMMONS DRIVE, STOCKTON, MO 65785 (NAICS 311911). OSHA activity number 339528127.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HAMMONS PRODUCTS COMPANY*
- Site address
- 105 HAMMONS DRIVE
- City
- STOCKTON
- State
- MO
- ZIP
- 65785
- Mailing
- 105 HAMMONS DRIVE, STOCKTON, MO 65785
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311911
- Employees
- 75
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
1910.212 A01
- Issued
- Dec 31, 2013
- Abate by
- Jan 28, 2014
- Penalty
- Initial $2,380 · Current $1,416 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by: (a) The end of the barrel grater was not guarded to protect employees from rotating parts. The end of the grater was a spoke which turned at 10 RPM. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- · I (S) $1416
- · Z (S) $2380
1910.303 B02
- Issued
- Dec 31, 2013
- Abate by
- Jan 28, 2014
- Penalty
- Initial $2,380 · Current $1,416 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: (a) In the sorting room, metal receptacle boxes were used at the end of an electrical pendant for plugging in equipment which was not installed in accordance with the listing or labeling. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE ACCORDANCE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN WITH 29 CFR 1903.19
Recent events (2)
- · I (S) $1416
- · Z (S) $2380
1910.305 G02 III
- Issued
- Dec 31, 2013
- Abate by
- Jan 28, 2014
- Penalty
- Initial $1,785 · Current $0 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: (a) On the south side of the Maintenance building in the huller area, the jesse huller power cord had pulled out of the plug head causing stress on the power conductors. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- · I (S) $0
- · Z (S) $1785
More inspections at Hammons Products Company*
View Hammons Products Company*'s full OSHA safety record →
More inspections in this industry (NAICS 311911)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339528127.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.