Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,288Inspections Most recent open 2026-07-24 Last loaded 2026-07-29

OSHA Inspection: MONRO MUFFLER AND BRAKE SERVICE

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of MONRO MUFFLER AND BRAKE SERVICE in 10 SARATOGA ROAD, GLENVILLE, NY 12302 (NAICS 811111). OSHA activity number 339537581.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Monro Muffler and Brake Service — free Get an email when a new federal OSHA severe-injury report for Monro Muffler and Brake Service is published. One employer, no account, unsubscribe in one click.
Site address
10 SARATOGA ROAD
City
GLENVILLE
State
NY
ZIP
12302
Mailing
10 SARATOGA ROAD, GLENVILLE, NY 12302
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811111
Employees
5
Ownership type
A

4 citations on file for this inspection.

1910.138 A

Deleted Serious Gravity 1 1 instance 2 exposed
Issued
May 2, 2014
Abate by
Jun 4, 2014
Penalty
Initial $3,000 · Current $0 Reduced
29 CFR 1910.138(a): Employer did not select and require employees to use appropriate hand protection when employees' hands are exposed to hazards such as those from skin absorption of harmful substances; severe cuts or lacerations; severe abrasions; punctures; chemical burns; thermal burns; and harmful temperature extremes:  (a) On or about 12/31/2013, at facility, for the technicians working with brake clean and PB blaster.  The employer did not select right personal protective equipment for the protection of the extremities such as but not limited to, gloves that are compatible with chemicals in use.
Recent events (3)
  • — F (S) $0
  • — C (S) $3000
  • — Z (S) $3000

1910.303 B02

Serious Gravity 1 1 instance 2 exposed
Issued
May 2, 2014
Abate by
May 10, 2014
Penalty
Initial $3,000 · Current $3,000
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:  (a) On or about 12/31/2013, at facility, the employer was using power strips which are not intended to be series connected(daisy chained) to other extension cords and which are not designed for industrial use to power equipment such as, but not limited to, a inspection machine.
Recent events (3)
  • — F (S) $3000
  • — C (S) $3000
  • — Z (S) $3000

1910.1200 H03 IV

Deleted Serious Gravity 1 1 instance 2 exposed
Issued
May 2, 2014
Abate by
Jun 4, 2014
Penalty
Initial $3,000 · Current $0 Reduced
29 CFR 1910.1200(h)(3)(iv): The details of the hazard communication program developed by the employer, including an explanation of the labels received on shipped containers and the workplace labeling system used by their employer; the safety data sheet, including the order of information and how employees can obtain and use the appropriate hazard information:   (a) On or about 12/31/2013, at facility, technicians handling hazardous chemicals such as, but not limited to, brake clean and PB blaster.  Employees were not provided with information and training on the hazards of the chemicals they work with or are exposed to in their work area.
Recent events (3)
  • — F (S) $0
  • — C (S) $3000
  • — Z (S) $3000

1910.305 B02

Serious Gravity 1 1 instance 2 exposed
Issued
May 2, 2014
Abate by
May 10, 2014
Penalty
Initial $6,000 · Current $6,000
29 CFR 1910.305(b)(2):  Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose:     (a) On or about 12/31/2013, at facility, for the technicians plugging in a sawzall or hand drill to an outlet with a damaged cover.     Monro Muffler and Brake Service was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.305(b)(2), which was contained in OSHA inspection number 942810, citation number1, item number 1 and was affirmed as a final order on 11/12/2013, with respect to a workplace located at Belfast, ME.
Recent events (3)
  • — F (S) $6000
  • — C (R) $6000
  • — Z (R) $6000

View Monro Muffler and Brake Service's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339537581.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.