Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MIRAGE CARPENTRY CORP.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MIRAGE CARPENTRY CORP. in 16 SHELLY ROAD, FREEPORT, NY 11520 (NAICS 238160). OSHA activity number 339538654.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Mirage Carpentry Corp. — free Get an email when a new federal OSHA severe-injury report for Mirage Carpentry Corp. is published. One employer, no account, unsubscribe in one click.
Site address
16 SHELLY ROAD
City
FREEPORT
State
NY
ZIP
11520
Mailing
200 JEFFERSON STREET APT. 1, NEWARK, NJ 07105
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
3
Ownership type
A

4 citations on file for this inspection.

1926.100 A

Serious Gravity 1 1 instance 2 exposed
Issued
Mar 27, 2014
Penalty
Initial $1,320 · Current $1,320
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  a) Worksite - Employees working directly under ongoing sheathing installation were not using head protection; on or about 01/18/14.  Note:  The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $1320

1926.1053 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Mar 27, 2014
Abate by
Apr 2, 2014
Penalty
Initial $2,200 · Current $2,200
29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access:  a) Worksite - An employee was using an unsecured ladder to gain access to the roof. The ladders side rails were approximately 10 inches below the upper landing; on or about 01/08/2014.  Note:  The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $2200

1926.102 A01

Repeat Gravity 5 1 instance 1 exposed
Issued
Mar 27, 2014
Abate by
Apr 2, 2014
Penalty
Initial $4,400 · Current $4,400
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents.  a) worksite - An employee installing sheathing with a pneumatic nail gun did not have eye protection; on or about 01/08/2014.  Note:  In addition to abatement certification the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.  The Mirage Carpentry Corp. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.102(a)(1) which was contained in OSHA inspection number 777101, citation number 1, item number 1 and was affirmed as a final order on 4/16/2013, with respect to a workplace located at 136 Hecker Street, Staten Island, New York 10307.
Recent events (1)
  • — Z (R) $4400

1926.501 B13

Repeat Gravity 10 1 instance 2 exposed
Issued
Mar 27, 2014
Penalty
Initial $6,160 · Current $6,160
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   a) worksite - Employees installing sheathing on an approximate 5-12 pitch roof approximately 20 feet above the ground were not using fall protection; on or about 01/08/2014.  Note:   Because abatement of this violation is already documented in the case file, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19.  The Mirage Carpentry Corp. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501(b)(13), which was contained in OSHA inspection number 777101, citation number 1, item number 2 and was affirmed as a final order on 4/16/2013, with respect to a workplace located at 136 Hecker Street, Staten Island, New York 10307.
Recent events (1)
  • — Z (R) $6160

View Mirage Carpentry Corp.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339538654.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.