ABERDEEN, MS ·
OSHA Inspection: HOLLY PERFORMANCE PRODUCTS INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HOLLY PERFORMANCE PRODUCTS INC. in 704 HWY. 25 S., ABERDEEN, MS 39730 (NAICS 336312). OSHA activity number 339540346.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HOLLY PERFORMANCE PRODUCTS INC.
- Site address
- 704 HWY. 25 S.
- City
- ABERDEEN
- State
- MS
- ZIP
- 39730
- Mailing
- 704 HWY. 25 S., ABERDEEN, MS 39730
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336312
- Employees
- 86
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C06 I
- Issued
- Feb 11, 2014
- Abate by
- Mar 10, 2014
- Penalty
- Initial $3,825 · Current $2,046 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed: (a) Facility - On or about January 07, 2014 the periodic inspection of lockout/tagout procedures were not conducted.
Recent events (2)
- · I (S) $2046
- · Z (S) $3825
1910.215 A04
- Issued
- Feb 11, 2014
- Penalty
- Initial $1,951 · Current $1,054 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: (a) H6 Machine Shop - On or about January 07, 2014 employee used a 6 inch pedestal grinder with the work rest not adjusted to at least one-eighth inch. (b) Maintenance Shop - On or about January 07, 2014 employees used 6 inch pedestal grinder with the work rest not adjusted to at least one-eighth inch.
Recent events (2)
- · I (S) $1054
- · Z (S) $1951
1910.215 B09
- Issued
- Feb 11, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (a) H6 Machine Shop - On or about January 07, 2014 employee used 6 inch pedestal grinder with the tongue guard not adjusted to at least one-fourth inch. (b) Maintenance Shop - On or about January 07, 2014 employees used 6 inch pedestal grinders with the tongue guard not adjusted to at least one-fourth inch.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.217 E01 I
- Issued
- Feb 11, 2014
- Abate by
- Mar 10, 2014
- Penalty
- Initial $3,825 · Current $2,046 Reduced
General-duty citation text
29 CFR 1910.217(e)(1)(i): The employer did not maintain a certification record of inspections which includes the date of inspection, the signature of the person who performed the inspection and the serial number, or other identifier, of the power press that was inspected: (a) Facility - On or about January 07, 2014 the employer did not have a certification record of inspections for power presses. (i) Bushing Press PRO543 (ii) Diamond Machine Shop Press
Recent events (2)
- · I (S) $2046
- · Z (S) $3825
1910.219 F03
- Issued
- Feb 11, 2014
- Penalty
- Initial $2,601 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed: (a) Tubing Cut-Off 1358 - On or about January 07, 2014 the guard that covers the drive chain and sprocket wheels was missing.
Recent events (2)
- · I (S) $1400
- · Z (S) $2601
1910.303 F02
- Issued
- Feb 11, 2014
- Penalty
- Initial $1,951 · Current $1,054 Reduced
General-duty citation text
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: (a) H1 Electrical Panel - On or about January 07, 2014 the breaker panel did not have the circuit breakers identified.
Recent events (2)
- · I (S) $1054
- · Z (S) $1951
More inspections in this industry (NAICS 336312)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339540346.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.