HINSDALE, IL —
OSHA Inspection: GIEWONT FRAMING & CONSTRUCTION, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of GIEWONT FRAMING & CONSTRUCTION, INC. in 610 HICKORY, HINSDALE, IL 60521 (NAICS 238130). OSHA activity number 339545048.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GIEWONT FRAMING & CONSTRUCTION, INC.
- Site address
- 610 HICKORY
- City
- HINSDALE
- State
- IL
- ZIP
- 60521
- Mailing
- 116 ALGONQUIN, CLARENDON HILLS, IL 60514
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 4
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.178 L01 II
- Issued
- Feb 26, 2014
- Abate by
- Mar 10, 2014
- Penalty
- Initial $1,760 · Current $700 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a power industrial truck: On or about January 14, 2014 an employee was not provided with the proper training to safely operate a rough terrain fork truck, exposing employees to the hazards associated with operating a powered industrial vehicle. Abatement certification is required of this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (3)
- — C (S) $1760
- — F (S) $700
- — Z (S) $1760
1910.178 M05 I
- Issued
- Feb 26, 2014
- Abate by
- Mar 10, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(m)(5)(i): When a powered industrial truck is left unattended, load engaging means were not fully lowered, controls were not neutralized, power was not shut off, and brakes set. On or about January 14, 2014 an employee left the load engaging means in the upright position while the rough terrain fork truck was unattended, exposing employees to a struck-by hazard from an unexpected release of energy. Abatement certification is required of this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (3)
- — C (S) $0
- — F (S) $0
- — Z (S) $0
1926.451 A06
- Issued
- Feb 26, 2014
- Abate by
- Mar 10, 2014
- Penalty
- Initial $2,200 · Current $1,100 Reduced
General-duty citation text
29 CFR 1926.451(a)(6): Scaffolds were not designed by a qualified person: On January 14, 2014, an employee was allowed to work on a wood framed scaffold attached to the forks of a rough terrain fork truck. The scaffold was not constructed by a qualified person, exposing the employee to a fall and or a scaffold collapse. Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (3)
- — C (S) $2200
- — F (S) $1100
- — Z (S) $2200
1926.451 G01
- Issued
- Feb 26, 2014
- Abate by
- Mar 10, 2014
- Penalty
- Initial $3,080 · Current $1,540 Reduced
General-duty citation text
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level were not protected from falling to that lower level. On January 14, 2014, an employee was not protected from a fall while working from a wood frame platform that was attached to the forks of a rough terrain fork truck, exposing the employee to a fall of 16.9 feet above grade. Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (3)
- — C (S) $3080
- — F (S) $1540
- — Z (S) $3080
1926.1053 B13
- Issued
- Feb 26, 2014
- Abate by
- Mar 10, 2014
- Penalty
- Initial $1,320 · Current $660 Reduced
General-duty citation text
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step: On January 14, 2014, an employee was using the top step of an "A" frame ladder to access a scaffold, exposing the employee to a fall. Abatement certification is required for this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (3)
- — C (S) $1320
- — F (S) $660
- — Z (S) $1320
More inspections at Giewont Framing & Construction, INC.
View Giewont Framing & Construction, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339545048.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.