GRAND PRAIRIE, TX ·
OSHA Inspection: TELESFORO GONZALEZ
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of TELESFORO GONZALEZ in 1051 N. DAYMIER RD., GRAND PRAIRIE, TX 75050 (NAICS 238160). OSHA activity number 339548265.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TELESFORO GONZALEZ
- Site address
- 1051 N. DAYMIER RD.
- City
- GRAND PRAIRIE
- State
- TX
- ZIP
- 75050
- Mailing
- 1123 NEW PORT AVE, DALLAS, TX 75224
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 7
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1926.416 E01
- Issued
- Feb 26, 2014
- Penalty
- Initial $1,020 · Current $1,020
General-duty citation text
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used. On or about January 15, 2013, on the north side of the construction site, employees engaged in roofing activities utilized an extension cord with the outer sheathing split exposing internal wiring. Employees were exposed to electrical hazards.
Recent events (1)
- · Z (S) $1020
1926.451 C02 IV
- Issued
- Feb 26, 2014
- Abate by
- Mar 26, 2014
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.451(c)(2)(iv): Front-end loaders and similar pieces of equipment were used to support scaffold platforms when they were not specifically designed by the manufacturer for such use. On or about January 15, 2013, on the north side of the construction site, employees engaged in metal roofing activities, used a work platform that was not approved by the forklift manufacturer, exposing the employees to a fall hazard of approximately 16 feet.
Recent events (1)
- · Z (S) $2000
1926.451 C02 V
- Issued
- Feb 26, 2014
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.451(c)(2)(v): Fork-lifts were used to support scaffold platforms while the entire platform was not attached to the fork and the fork-lift was moved horizontally while the platform was occupied. On or about January 15, 2013, on the north side of the construction site, employees engaged in metal roofing activities, worked from a work platform that was not securely attached to the forks of a Case 586E forklift that was moved while occupied, exposing the employees to a fall hazard of approximately 16 feet.
Recent events (1)
- · Z (S) $2800
1926.451 G04 I
- Issued
- Feb 26, 2014
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms. On or about January 15, 2013, on the north side of the construction site, employees who worked from a work platform without mid-rails installed on all sides were exposed to a fall hazard of approximately 15 feet while engaged in metal roofing activities.
Recent events (1)
- · Z (S) $2000
1926.760 A01
- Issued
- Feb 26, 2014
- Penalty
- Initial $1,700 · Current $1,700
General-duty citation text
29 CFR 1926.760(a)(1): Each employee engaged in a steel erection activity who is on a walking/working surface with an unprotected side or edge more than 15 feet (4.6 m) above a lower level was not protected from fall hazards by guardrail systems, safety net systems, personal fall arrest systems, positioning device systems, or fall restraint systems. On or about January 15, 2013, on the north side of the construction site, employees who worked without fall protection were exposed to a fall hazard of approximately 16 feet while engaged in metal roofing activities.
Recent events (1)
- · Z (S) $1700
More inspections in this industry (NAICS 238160)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339548265.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.